UNSOLVED

robvei

updated

21 years ago

R

robvei

19 Posts

0

24125

April 5th, 2006 10:00

Dimension 4700 temperature readings

I've tried using SandraSoft to monitor environment temperatures inside my Dell 4700. The software states that no monitoring devices are found. From checking the Intel web-site, it appears that this motherboard should have them. Are the devices for monitoring temperatures missing from this model?
 
I used Speedfan to see if it would work, but it only gives me data on the hard drive temperature, which is 58C. From what I've read, this is a bit high. Can someone advise me on this? I'm planning on upgrading the video card from the X300 to a Geforce 6800GS, and adding another two 512 sticks of RAM. I would like to be able to monitor the temps, if any way possible. And if I need to install a hard drive fan, could you please recommend a model that is compatible with this machine. Thanks
 
Edited: Sorry, I should have mentioned that the hard drive is a Maxtor 6Y080M0 (80GB)

Message Edited by robvei on 04-05-2006 06:55 AM

  • Flatnose

    93 Posts

    634

    0

    Posted April 8th, 2006 01:00

    Hi robvel:

    The HD is the only thing that you can monitor on a Dell using software. If you add a 2nd HD or video card keep an eye on the HDs temps. The D-4700 runs hot because of the cpu fan blowing into the box. There are many post about this problem and how to fix it.

    Dell Dimension 4700
    Upgraded (from 2.8) Intel Pentium 4 550 w/HT (3.4GHz, 800FSB)
    2.5 gig DDR2 PC4200 SDRAM
    2 80 gig sata HDs Maxtor and WD800JB
    Sony DRU-820A Firmware 1.0B
    BenQ 1655 Firmware BCDB - QSuite v2.0
    19 Dell FP
    XP Home SP2
    Customized Cooling System
    Upgraded PSU 420W

    Message Edited by Flatnose on 04-07-200609:59 PM

  • robvei

    19 Posts

    634

    0

    Posted April 8th, 2006 05:00

    Thank you very much for responding to my message Flatnose. After searching several threads I finally found the post by lee_hacken giving detailed instructions and pictures for turning the case fan around. And thanks to lee hacken for posting those very easy to follow pictures and instructions. I followed the instructions, and everything is running much cooler now :)

    I'll post a link to the thread here for anyone else who may be searching for a fix to this problem.

    http://forums.us.dell.com/supportforums/board/message?board.id=dim_harddrive&message.id=96201&query.id=0#M96201

    Message Edited by robvei on 04-08-200601:12 AM

  • bloort

    5 Posts

    634

    0

    Posted October 26th, 2011 18:00

    I've had this 4700 sitting on the shelf for quite some time, and tried three of my used sata hard disks in it. The hard drive temperate would sit at 51, and climb as high as 57 under load. Something was seriously wrong, so not wanting to risk my good used drives in it, it has sat for a long time. Wanting to get it running, i would try other drives as they came my way. Same way high drive temperatures. Eventually, by chance, I too did notice airflow blowing forwards past the front usb ports which tipped me off to something wasn't right. Sure enough, thanks to Flatnose's post above, i checked and the cpu fan _WAS_ sucking air from the back and then across the cpu and straight onto the hard drive. It's hard to tell, because the CPU fan is immediately beneath the power supply fan. To your hand, it may feel as if nothing is wrong, because the power supply is blowing air out at the same time as the cpu fan is sucking air in. It's hard to tell. But wave a little cigarette smoke near the cpu fan on the back of the computer and see. Or some tissue paper. So thanks to Flatnose's post above, i have since physically reversed the cpu fan (turned the fan aroun 180 degrees). Now the Hard Drive temperature sits at 32 and peaks at 40 during 100% cpu load stress testing. MUCH better. Now if i install a replacement hard drive, it will no longer die from overheating. The "how to" link above appears dead, just like the original drive from this computer. But if anyone requires instructions, i'll put one togther. The service manual for the 4700 shows quite clear instructions on how to replcae the fan. Just follow that, and orient the fan so it blows are out the back of the case.

    This little machine has a sad story if anyone cares to read on further. The original drive died 3 months after the warranty expired, and without a doubt was likely riddled with bad sectors while still under it's warranty period. The owner of the computer hasn't been able to afford a replacement drive for all these years, so it's been sitting here on the shelf staring at me. From time to time i would try different drives to see if they would run cooler, but no luck, and time marches on. But today, after reversing the fan and making things right, It is my FIRM opinion that this system on my desk here was flawed from the factory, specifically the incorrectly installed cpu fan was blowing cpu heat into the case instead of removing heat from the case, blowing heat directly onto the internal hard drive, thus killing the hard drive - 3 months out of warranty. Dell, you should help my friend, a single mom, by providing a replacement drive... at least a used or refurbished or smaller one would be an honorable thing to do. Because had the fan been installed correctly from your factory, she would likely still be enjoying her Dell Dimension 4700.. 15 months and then failure, is not an acceptable life cycle for a new computer. I've serviced many many dell computers in my time, they are great machines at a great price, but occasionally i come across something like this, and I tax Dell to stand behind their product, and usually they do. I'll report back with any updates.

    Peace.

    David

  • bloort

    5 Posts

    634

    0

    Posted October 26th, 2011 21:00

    Here is teh section in the dell manual about how to remove the cpu fan in case you need to fix things yourself.

    support.dell.com/.../parts.htm