UNSOLVED

SkeeterVT

updated

12 years ago

S

SkeeterVT

1 Message

0

63860

May 4th, 2014 15:00

CD-ROM/DVD Drives in Precision 690 Does Not Work, Locks Up Computer

I have a Dell Precision Workstation 690. It currently runs the 32-bit version of Windows 7 Professional Service Pack 1, with 4 GB of RAM. I want to upgrade to the 64-bit version so that I can expand my computer's RAM from 4 GB (the 32-bit maximum) to at least 10 GB. 

I have the installation disk for the 64-bit version, but both the CD-ROM and CD/DVD drives in my  computer do not work. They cause the computer to lock up, forcing me to reboot it. I tried to update the CD/DVD drivers, but the "update driver" button in the CD/DVD "properties" tab is greyed out -- and I have no idea why.. 

As long as the CD/DVD drives don't work, I cannot upgrade to the 64-bit verison of Windows 7. There's no point in buying and installing additional memory cards as long as I'm stuck with the 32-bit version.  Both the Windows Troubleshooter and Microsoft FixIt fail to resolve the problem. Help!

  • osprey4

    6 Operator

    •

    34230 Posts

    1016

    0

    Posted May 5th, 2014 18:00

    Hi Skeetervt,

    In order to install Windows 7-64, you need to boot to the Windows disc in the DVD drive. If you are trying to run the installer from within Windows, you're not following the correct procedure. Please follow my link below to the Windows installation guide for help.

  • Davekb390

    5 Posts

    1016

    0

    Posted July 10th, 2014 23:00

    I'm having a strangely similar problem with the optical drives on my 690. I assume the orig. poster solved his issue, however the resolution doesn't appear here.

    I recently installed Windows 7-64, the installation appeared to go flawlessly...but now I can't access either of my optical drives. They act very similar to the O.P's issue, without the greyed out "update driver" tab symptom.

    I originally booted from, and installed Windows 7 from the CD Rom...so I know it works. I followed all of the links listed in Osprey4's response, tried all that seemed relevant, but to no avail.

    Very frustrated at this point and contemplating a wipe and reload...any advice would be appreciated.

    Thanks,

  • osprey4

    6 Operator

    •

    34230 Posts

    1016

    0

    Posted July 11th, 2014 05:00

    Hi Davekb390,

    Can't access means what? You can see the drives but they don't work? Or do you not see the drives at all? Any problems in device manager?

  • Davekb390

    5 Posts

    1019

    0

    Posted July 11th, 2014 10:00

    Thanks for the reply,

    Can't access means I can see them in "my computer" and the device manager, but cannot access the data on the disks.

    The CD ROM drive spins up to full rpm, then pretty much renders the computer useless (apparently using every resource) until it is shut down. The disk cannot be ejected with the eject button or by right clicking on the drive icon. After a while, the drive will disappear from "my computer" entirely. The drive will continue to spin at full rpm until the computer finally shuts down.

    The DVD drive acts differently, in that it does not spin at full rpm and can be ejected...however the data cannot be accessed.

    No problems with either in the device manager and I have uninstalled the devices twice with no effect. They just show back up when the computer reboots with the same issue.

    Thanks for your continued help.

  • osprey4

    6 Operator

    •

    34230 Posts

    1019

    0

    Posted July 12th, 2014 04:00

    Try the upper and lower filter trick (link below).

  • Davekb390

    5 Posts

    1019

    0

    Posted July 14th, 2014 15:00

    I'll try it again tonight, but I've tried both the Microsoft Fix it utility and manually removing the upper and lower filters...both to no avail. Neither the upper or lower level keys were present in the registry.

  • osprey4

    6 Operator

    •

    34230 Posts

    1019

    0

    Posted July 14th, 2014 17:00

    Ok, you have IDE optical drives in the system. Sometimes one failed drive will render both inoperable. Run the Dell diagnostics on both drives with a data disc in the drive and see if one of them is bad. It may be necessary to disconnect one drive to get a definitive result.

  • Davekb390

    5 Posts

    1019

    0

    Posted July 14th, 2014 17:00

    I have run the Dell Diagnostics from the utility partition (or bios?) and neither drive comes up with any errors. I'll try disabling one or the other and test them again. Could it have something to do with the drivers...chipset, controller or otherwise?

  • Davekb390

    5 Posts

    1019

    0

    Posted July 15th, 2014 00:00

    Ran the Dell Diagnostics again tonight. Both drives passed all tests with flying colors. Tested them together and separately...same results, no errors.

    I finally gave up on the original drives and installed a SATA DVD-RW drive out of my old computer. Problem solved...recognizes and reads from that drive just fine. Apparently Windows 7 doesn't like IDE drives.

    I've spent more time than I care to admit trying to solve this problem, so I guess I'll just stick with this "workaround". Just seems like I should have been able to make it work...they worked before & outside of Windows.

    Oh well...thanks for all the help!

  • osprey4

    6 Operator

    •

    34230 Posts

    269

    0

    Posted July 15th, 2014 17:00

    Good to hear!