UNSOLVED

tomschmied

updated

22 years ago

0

3789

July 13th, 2004 03:00

cd burning speed

Please help me someone. No matter what burning software I have put into my new computer Dimension 8300, it will only burn at 48X,  I have always been able to pick the speed that I want to burn at with any other computer. Can someone help me reset this thing, or if someone from Dell is monitoring, please get in touch with me.... I am getting very frustrated
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    471

    0

    Posted July 13th, 2004 09:00

    Are you loading the blank CD-R BEFORE attempting to select the speed.  If you try to select the speed before loading a blank CD-R most programs will only default to the burner's highest speed.
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • 471

    0

    Posted July 13th, 2004 11:00

    No the disk has already spun up.
  • -WYSIWYG-

    85 Posts

    471

    0

    Posted July 13th, 2004 16:00

    there are 3 usual limitations to writing to a blank CD-R

    1-Drive Speed (In your case 48x Max Variable)
    2-System (Nero will evaluate what the maximum transfer rate is before writing)
    3-Media Speed

    I find a lot of people do not check the media speed when purchasing.  For Example, the Memorx Black-Bottom Discs are only rate for 16x.  Yet many of the other media is rated for higher than that.  Watch out for generic media that isn't packaged.  It is cheap, but may write like poop.  Most CD-RW drives will pick the "optimal" setting for the media inserted.  This happens with Nero when putting in media for an LG 4081B.  Nero literally eliminates invalid options.

    Hope this helps you!!

    ^_^ Cheers

  • MT_tilidie

    1 Message

    471

    0

    Posted July 22nd, 2004 02:00

    wat if ur max is 24x and ur cds r capatible with up to 48x but u can only write at 4x?