I just updated from XP to Vista (32bit). My Dimension 8250 (200G, 3.06H, 1GRam) will now not boot when turned on. I get the Dell Startup screen then "Invalid System Disk.... Replace disk and press any key." If I press a key it gives me the same message. The only way I can boot is to press "F12" during startup, then select "Boot from Hard Drive." It then boots normally. I tried running the repair option on the Vista CD and nothing was found even after running the advanced startup repair. Any help would be appreciated.
you have to enter bios and change the boot sequence back to normal (or keep it as primary hard disk, then your cd drive). Just press F2 when you power on your PC and it should be under "boot" i think.
i actually was having this same problem before so yeah, hope i helped somehow
Message Edited by bherbert77 on 08-02-2008 02:24 AM
Thanks guys! I had my CD/DVD drive designated as primary drive vs. hard drive. Funny thing is, it really does'nt tell you how to change the order unless you remove or add a checkmark. You have to change the order of the listed drives by hitting + or - to move the hard drive up to number 1. But the again; I didn't even know what the "bios" was until you explained it! Thanks again.... problem resolved!
tr4
1 Rookie
•
1727 Posts
158
0
Posted August 2nd, 2008 00:00