UNSOLVED

Ranbeau

updated

19 years ago

R

Ranbeau

6 Posts

0

9067

March 6th, 2008 01:00

B&C Green Diagnostic Lights

I have a dimension 4700 and the B&C lights are green A&D are yellow, computer will not even boot up.  Last time computer was running I tried to flash the bios because the computer was having shutdown issues so I reformatted hdd and reinstalled windows and the computer would still not shutdown.  I went to dells website and went to download page per service tag number and downloaded a newer version A10 bios.  I inserted the floppy disk with the newer version A10 bios, powered up the computer and now the computer will no longer boot up.  At first I was getting ABC green & D was yellow and two beeps after hitting the power button, I checked all connection on HDD, Video Card, CD, etc.  Now the two beeps have stopped and now the lights are B&C green and A&D is yellow and computer will start.

 

 

Purchased 12/2004

Windows XP Pro SP2

Phoenix Motherboard

 

 

0 4X388 INSTRUCTION..., PREP-MTL, DEVIATION..., DIMENSION..., INCREASE..., NUMBER... 1 T7281 PROCESSOR..., 80547, PENTIUM 4 PRESCOTT DT..., Pentium 4 Prescott DT, 3.0GHZ, 1 MEGB, 800FSB..., SOCKET T..., E0, MALE... 1 4N454 KEYBOARD..., 104, UNITED STATES..., NMB..., LOW COST..., MIDNIGHT GRAY... 1 F2854 KIT..., MOUSE..., PERSONAL SYSTEM 2..., 2BTN, WHEEL..., PRIMAX ELECTRONICS LTD... 1 W2335 DUAL IN-LINE MEMORY MODULE..., 256, 533M, 32X64, 8, 240, 1RX8 1 W6946 ASSEMBLY..., COMPACT DISK DRIVE..., 48X, HALF HEIGHT..., SAMSUNG..., CHASSIS 2005... 1 P5288 CARD (CIRCUIT)..., GRAPHICS..., 128, X300, SERVER ENHANCED..., MRMGA8, 2 1 K5805 HARD DRIVE..., 40GB, Serial ATA..., 7.2K, 8MB, SEAGATE-ALPINE... 1 T7166 KIT..., SOFTWARE..., WP-PRDCT-STE12, ENGLAND/ENGLISH..., V2 1 G7624 KIT..., SOFTWARE..., OVERPACK..., WXPPSP2, COMPACT DISKETTE W/DOCUMENTATION..., ENGLAND/ENGLISH... 1 U4931 DISPLAY..., FLAT PANEL DISPLAY..., 17, DUAL VOLTAGE..., E173FPB, MIDNIGHT GRAY..., DELL AMERICAS ORGANIZATION...

 

 

 

  • shesagordie

    12 Elder

    •

    46017 Posts

    506

    0

    Posted March 6th, 2008 02:00

    Ranbeau

    YGGY indicates a either a failing hard drive or floppy drive.

    See here.

    Try running Dell diagnostic's extended test, read, write, verify, on the system, not the quickie express test.

    How to use Dell's Diagnostic Utility

    After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • Ranbeau

    6 Posts

    506

    0

    Posted March 6th, 2008 15:00

    I'm dead in the water, computer will not boot up at all.  I push the power button and nothing shows up on the monitor, the cooling fan does come on and I get the diagnostic likes but that's it.  I did use an external floppy drive when I tried to flash the bios.

  • Ranbeau

    6 Posts

    506

    0

    Posted March 6th, 2008 16:00

    I tried last suggestions with no success.  This time I unplugged the hdd and cd drive and pressed the power button.  Waiting about 3o seconds and reconnected both hdd and cd and pressed the power button.  Now I get again 2 beeps and the diagnostic light indicates ABC Green & D is yellow.

  • Majestic

    2 Intern

    •

    9371 Posts

    506

    0

    Posted March 6th, 2008 16:00

    Ranbeau,

     

    One suggestion........ not sure if your BIOS update was successful from what you described. If it was then try clearing the NVRAM using the procedure I have listed below.  After a BIOS upgrade it is not uncommon for the newer BIOS version to have a conflict with the information stored in the NVRAM or for the NVRAM to become corrupted.

     

    With the machine unplugged from the wall remove the battery from the motherboard.  Then with the machine still unplugged press the On button for 30 seconds to dissipate any remaining electrical charge on the motherboard.  Then re-install the battery, plug the machine back into the wall and see if it will boot normally.

     

    Click here for additional information on how to remove the battery from your model's on-line Service Manual.

    Message Edited by Majestic on 03-06-2008 12:29 PM
  • Majestic

    2 Intern

    •

    9371 Posts

    506

    0

    Posted March 7th, 2008 11:00

    Ranbeau,

     

    Have you tried disconnecting the floppy drive as well?  Also during your testing make sure the only things plugged into the system are the monitor, keyboard and mouse.  Eliminate any unneeded USb devices.

     

    Also since your system is several years old I would suggest trying a new motherboard battery.  A failing battery can cause a variety of erroneous boot up errors.  A new 3-Volt, CR2032, coin cell battery can be purchased for around $3 (US) and is available at any Radio Shack, computer stores and most discount stores like Wal-Mart.  For a couple of bucks it is a cheap thing to try.