I was wondering i just bought a dell E510 with 80 gig HD I have a 160 gig WD harddrive i wanted to add for more storage. after opening up this box i found i am behind the times. this has a 7200 rpm HD in it but hooks up totally different than my old set up. some kinda new style cables i rekkon. my question is can a western digital HD standard old style ribbon hook up to one of these newer set ups? and if so what do i need.
Karl email me at blackbart@hot.rr.com:smileyindifferent:
You probably could but it would have to be connected on the PATA channel. Then you have to find a mounting bracket that fits. Personally, I would take that drive back and get a SATA drive.
If there is one optical drive installed, you could install the IDE/ATA hard drive in the 5.25" internal open bay and connect it to the end cable connector. Remember to set the jumpers to "Cable Select".
You will require a 3.5"- HD Bracket to install the drive in the internal 5.25" bay.
Use a powered external IDE USB 2.0 hard drive enclosure, this is the method I used for my D-8400 to install a IDE HD.
Use a PCI IDE controller card and install the drive inside the case and connect it to the controller.
After the hard drive is installed, enter the BIOS setup and check that the drive is set to auto [on] and in order for windows to recognize the second hard drive, it must be patitioned and formatted. These are generic instructions for installing an additional hard drive using Windows XP Disk Management, they are by Seagate, but apply to all brands.
You can buy an external harddrive case then install your PATA hard drive in there. After that connect the external harddrive to your computer via USB connection.
kmn96
54 Posts
245
0
Posted June 8th, 2006 23:00