UNSOLVED

DaneOtis

updated

22 years ago

D

DaneOtis

7 Posts

0

4081

November 10th, 2004 20:00

8400 Hypertreading SATA troubles

I have a relatively new (August) Dimension 8400, XP Pro SP1, original Dell load, BIOS A01, 160GB SATA no RAID.
 
I have continuously received Events 51 and 57 ever since the PC was shipped, and they increased massively when I changed Memory Useage from "Programs" to "System Cache".  XP no longer booted properly (autostarts crashed, programs came up and then disappeard instead of dropping into the systray).
 
I looked on the Internet and found a thread by where some people had experienced troubles with the Intel ICH6, SATA, and Hyperthreading.  I tried disabling HT in the BIOS, and magically all my troubles (and the 51/57 events) disappeared!
 
I then tried installing the Intel IAA suite 4.5.0.6515, but this did not help.  My only option is to disable HT and lose the few performance ticks that it brings.
 
I am reluctant to upgrade to A03 or try any other tricks (unless I can guarantee that it will work) as I have been burnt before by crashed and inaccessable HDDs.
 
Any ideas?  My feeling is that somehow having Intel IAA and Intel HT in the same box can create timing issues that cause the HDD access to "burp" every once in a while causing read errors in XP.
 
Regards,
 Dane
  • sawaddi

    2 Intern

    •

    611 Posts

    139

    0

    Posted November 11th, 2004 12:00

    If that was the case, this forum would be full of problems relating to that.  I have an 8400 and an XPS Gen 3.   Neither have that problem.

    Have you tried a clean install with SP2 and only Dell's latest drivers?

     

  • 139

    0

    Posted November 17th, 2004 02:00

    I have a Dimension 8400, XP PRO SP2, SATA Raid-1, built in August 2004, and I upgraded to the A03 BIOS with no problems. I checked my event log and do not see any of the errors you are reporting. My HT is turned on.

     

    By the way, I have a problem with my CPU fan running continously at a very audible level. I have recently read that Dell may have a design problem with the heat sync on the CPU, resulting in systems running hot when the CPU is idle, which causes the fan to run continuously (like in my system). To me this is too noisy. Do you have an issue like that with your 8400 or does yours run silently when the CPU is idling?

     

     

  • DaneOtis

    7 Posts

    139

    0

    Posted November 18th, 2004 19:00

    Dear Eric,
     
    Yes, I find that my 8400 is quite loud (even in idle) but I have not yet taken a look at which fan is making the most noise.  Generally, the HDD can't be heard, so it's either PS or CPU.
     
    Regarding your event log, have you tried setting the memory option under system properties?  This is what really set my system off.
     
    I have given up and changed the memory setting back to applications, as the HT seems to make almost all of my applications snappier - but at the expense of cached files.
     
    Dane