A 3-week old 700m had a system crash - the OS was not available. It was necessary to use the XP Pro CD that came with it to get things running.
I would like to restore unit to "like new" condition. Spoke with Chris in Tech support and he says, can't be done.
It seems a bit "odd" (stronger language is not appropriate in a forum) that the very function of having a 3.5 GB recover space is rendered useless by the very act required to use it - to get some semblance of Windows running.
I am not fearful of editing code, using other software and/or otherwise diving into the system - any suggestions as to how one can use the "image" file in the system to restore it? It is too late to return the notebook, otherwise I would!
A 3-week old 700m had a system crash - the OS was not available. It was necessary to use the XP Pro CD that came with it to get things running.
I would like to restore unit to "like new" condition. Spoke with Chris in Tech support and he says, can't be done.
It seems a bit "odd" (stronger language is not appropriate in a forum) that the very function of having a 3.5 GB recover space is rendered useless by the very act required to use it - to get some semblance of Windows running.
I am not fearful of editing code, using other software and/or otherwise diving into the system - any suggestions as to how one can use the "image" file in the system to restore it? It is too late to return the notebook, otherwise I would!
Any ideas?
Noibn
Well the bad news is that once you Used the XP CD it changed the MBR (Master Boot record) and that can't be fixed.
But you can recover the 3.2 gb by deleting the Partition.
Message Edited by jankerson on 04-09-2005 03:15 PM
If you call Dell Tech Support and get a cooperative Indian, tell him/her that you cannot access your hard drive because of corruption. Request a replacement hard drive be sent to you WITH the preloaded software you paid for when you bought your 700m and they WILL send you a completely re-inaged warranty replacement hard drive.
Once you get it, use TrueImage software to create a backup image of the entire hard drive. Back up to CD's or an external USB drive. If you ever screw up your drive again and lose the Dell hidden diagnostic and restore partitions you can restore the CD or external drive image to your internal drive and your hidden functions will work again.
If you made a Restore Disk before all this happened, there is a chance. I made a Restore Disk before I had a replacement drive sent out to me (my HDD had a persistent ticking). When my new [blank] HDD came, I switched it out and INSTEAD of using the WinXP CD, I used the Restore Disk that I created. Upon final install, it brought back my system to factory spec, that is, without PowerDVD, WordPerfect, and Sonic which were supplied in the box. I wiped again anyway and reinstalled with the WinXP CD b/c I didn't want all the other apps installed.
My point is, from my experience, a blank HDD (completely formatted) with your personally created Restore Disks should enable you to bring your computer back to what it factory spec. It worked from my experience, although I haven't read about anything similar in these forums...
If you call Dell Tech Support and get a cooperative Indian, tell him/her that you cannot access your hard drive because of corruption. Request a replacement hard drive be sent to you WITH the preloaded software you paid for when you bought your 700m and they WILL send you a completely re-inaged warranty replacement hard drive.
Once you get it, use TrueImage software to create a backup image of the entire hard drive. Back up to CD's or an external USB drive. If you ever screw up your drive again and lose the Dell hidden diagnostic and restore partitions you can restore the CD or external drive image to your internal drive and your hidden functions will work again.
Yeah that will work. :smileyhappy:
Be really nice to them though when calling. :smileywink:
Many thanks for all of your input - as I already spoke with Dell, the exchange issue is pretty well gone. In reading other postings of similar problems it seems that a solution is possible for those who know how to program - I am a hardware type.
My first "commercial" computer was a IBM PC purchased from PCs Limited, when Michael Dell was selling "gray goods" and had a reputation that required reorganization and renaming the company.
I avoided buying Dell systems for several reasons and had a few computers since the early days but my Sony notebook was destroyed in a accident and so I finally went for it - subsequently, it is not a decision I am pleased with.
As a professor of management, (in NYC), I was warned by my students that I should look at alternate sources. Alas, I have much "first hand" fodder for my lectures, especially when we address the "Dell" case.
If you had good luck with Sony support, count yourself in the decided minority. Among the major PC vendors, no one stands out for exceptional support (except Apple in the Mac world), but Sony is hands-down the bottom of the barrel.
In fact, I did have a problem - I purchased a Targus power supply as I had a meeting a left my Sony one in the office. After a week or so the Sony died a terrible death and cost $250 +/- to repair - "damaged eprom" was the claim. As an engineer who used to design hardware systems, I was surprised.
I did some research and found that the Targus PS, if plugged into the Sony before plugging into the electrical outlet would send a transient through the company and damage it.
As for dealing with Sony - yes, it is a PITA (pain in the...) especially as I went to their NYC location at the request of a 'phone conversation and they treated me with contempt - instructing me to send the unit to CA. Very unfriendly group.
The good news is - the unit never failed - until I damaged it with the Targus PS and X years later the strap on my bag broke and I dropped it.....
As for Dell. I had the opportunity to call them on several occasions. Their 'phone system is "heck bent" on telling you not to call them but go on-line (ok, I know why) - their TV ad is not 100% accurate. When I did speak with Tech-support they were friendly. However, there has yet to be a time when they were of any help. Probable reason - if I have to call, it is not a simple problem. In this last episode, I prefer not to lie to get service - they have a design error and I expect the world's leading PC maker to address the issues and not simply say - "I'm sorry, there is no way to restore your system to a like-new condition."
Dell raised the bar - now they should follow their own lead.
I would not argue the premise that IBM and Dell offer good products - with nearly 35 years in industry one can appreciate a job well done.
That said - Dell like most vendors in the busines, does not "manufacture" their computers - they assemble the systems from already proven commodity sub-assemblies, e.g., Intel motherboards...- a briliant bit of thinking. They established the benchmark for production of these systems! IBM and others, while doing an excellent job in R&D found themselves designing items that were already done or best done by others. The result - expensive computers with little significant added value, especially when we consider the lifespan of these systems.
As for outsourcing - I can't think of a company in the business that doesn't use outsourcing.
So let's keep the good guys good - by not accepting poor work or poor performance.
jankerson
2843 Posts
374
0
Posted April 9th, 2005 18:00
Well the bad news is that once you Used the XP CD it changed the MBR (Master Boot record) and that can't be fixed.
But you can recover the 3.2 gb by deleting the Partition.
Message Edited by jankerson on 04-09-2005 03:15 PM