
UNSOLVED
4100MP Switching Sources
I just got my 4100MP in the mail. The picture is great but about half of the time when I switch from the M1 input with progressive scan DVD (using the M1 to component adapter) back to any NTSC source I get nothing but lines across the screen. This was addressed in a previous post, but mine does not respond to the fixes.
The Auto Adjust (resync) button on the remote (and the one on the top of the projector) does nothing. This is what the manual says to do and it worked for the other poster with this problem. Even disconnecting the progressive scan source and restarting the projector doesn't work. If I switch back to the M1 while having this problem, it works fine.
The only thing that works is leaving projector off for 10-15 minutes. Is my projector defective or is this a common problem? I thought the resync would work but it doesn't. I was going to use this as a TV replacement, but if this is typical when switching sources, I may have to return it.
Responses (1)
Solutions (0)

jedirun
10 Posts
89
0
Posted April 25th, 2004 04:00
I called Dell, and they replaced the projector.