My setup is a Dell Dimension E310 with AT&T DSL, and a D-link DI-524 wireless router is sharing the internet. Is there a way the router can network the AIO 924 printer? Originally, i installed the printer using the "Personal Installation" method. Do i need to re-install it and choose "Network Installation" or not? I've already shared the printer via XP's 'Printers and Faxes" control panel. What do i need to do next?
The print server is an IP device, the included sofware does the network configuration, all you do is connect it to your router, run software wizard, and install printer drivers. Here's the one I have, it worked flawlessly with the three different laser printers I've used with it. This also has a 4 port switch so you can connect multiple PC's or IP devices as well.
I just noticed some purchasers have had difficulty with this print server and specific printers. Might not be a bad idea to contact manufacturer of any print server you're considering and double check compatibility with your printer before purchasing. The Linksys worked perfectly with every printer I've used it on. And you shouldn't have to do anything to your router when you install your print server.
MrGuy
121 Posts
319
0
Posted March 16th, 2008 14:00
Your printer is a USB device. The only way you could have it work the way you're describing is to use a USB/Network print server.