UNSOLVED

bahree

updated

20 years ago

B

bahree

6 Posts

0

9481

January 27th, 2007 18:00

Instslling 1815dn and Vista

Hi,
I am on Vista x32 and while I can connect to the printer (1815dn) by creating a TCP/IP port and using the XP drivers, I wanted to know how can I install the Network  Scan application that works on XP - I tried installing that but it would not install on Vista.
 
The only thing in the download section is the Firmware update - when selecting Vista. I have upgraded to the latest firmware on the printer.
 
If this has not been released for Vista yet - any ETA on when would this be available?
 
Thanks.
  • helmecj01

    2 Intern

    •

    2412 Posts

    251

    0

    Posted January 27th, 2007 19:00

    Hi

    Dell MFP Laser Printer 1815dn
    Firmware
    Release Title: Printers: Dell MFP Laser Printer 1815dn, Firmware, Multi OS, Multi Language, Printer Dell MFP Laser Printer 1815dn, v.1.03.03.08, A02
    Release Date: 25/01/2007
    Criticality: Optional
    Description: This is the firmware v A02 (1.03.03.08) for Dell 1815dn MFP Laser Printer. Download the executable file on your PC and connect Dell 1815dn through USB. Power on the printer and double click on the .exe file to upload the firmware. DO NOT POWER CYCLE THE PRINTER WHILE FIRMWARE UPGRADE IS IN PROGRESS.

    By downloading, you accept the terms of the Dell Software License Agreement.

    File Name File Size Download Time (56K) File Format
    Dell1815dn_V1.03.03.08_AutoUpgrade.exe 6 MB 14.8 min Hard-Drive
    Download Now

    Add to My Downloads

    FTP Download

    Other Formats

    Criticality
    Optional Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

    Additional Information
    No information available.

    Important Information
    DO NOT POWER CYCLE THE PRINTER WHILE FW UPGRADE IS IN PROGRESS.

    Fixes and Enhancements
    This is the firmware v 1.03.03.08 for Dell 1815dn MFP Laser Printer.

    Download the executable file on your PC and connect Dell 1815dn through USB. Power on the printer and double click on the .exe file to upload the firmware.
    DO NOT POWER CYCLE THE PRINTER WHILE FW UPGRADE IS IN PROGRESS.

    Installation Instructions
    Custom Instructions for ReleaseNote_Dell1815dn(31-Oct-2006).xls:

    Instructions for ReleaseNote_Dell1815dn(31-Oct-2006).xls:

    1) Click Download now.
    The File Download window appears.

    2) Click the Save button.
    The Save As window appears.

    3) Select Desktop using the drop-down menu to the right of Save in.

    4) Click the Save button.
    A progress meter moves as the download is completed.

    5) Double click the Icon on your desktop for the newly saved file to open the the Release Notes.
    Custom Instructions for Dell1815dn_V1.03.03.08_AutoUpgrade.exe:

    Updating Firmware on the Dell Laser Printer MFP 1815dn
    ======================================================

    NOTE: Do not turn off your printer or computer, or disconnect any cables during this operation. Doing this will corrupt the memory and the printer will be permanently damaged.

    USB-Connected Printers
    ======================

    Firmware File Name : Dell1815dn_V1.03.03.08_AutoUpgrade.exe

    1. Download the file name “Dell1815dn_V1.03.03.06_AutoUpgrade.exe” on your PC.
    2. Connect your PC to Dell1815dn via USB.
    3. Double-Click the “Dell1815dn_V1.03.03.08_AutoUpgrade.exe” icon to launch the Firmware Update Utility.
    4. When the Firmware Update Utility launches, select the “Local (USB)” option.
    5. Click the “F/W Update” button.
    6. At this point, the utility will begin to download the firmware to your printer.
    7. Once the firmware has been sent, a message stating, “Update Complete!” will be displayed.

    WARNING: Even though the “Update Complete!” message is displayed on your computer, the printer update is not fully completed until the printer has rebooted itself and “Ready” message is displayed on the operator panel of your printer.

    The update may take several minutes and during this time, do not turn off your printer or computer or disconnect any cables during the update process. Doing this will corrupt the memory and the printer will be permanently damaged.

    8. The printer re-booted and the LCD panel shows “Ready” message.
    9. You have successfully completed the FW upgrade.

    --------------------------------------------

    Network-Connected Printers
    ==========================

    Firmware File Name : Dell1815dn_V1.03.03.08_smdall.hd

    1. Download the “Dell1815dn_V1.03.03.08_smdall.hd ” on the desktop of the system that is connected to Dell1815dn through network.

    2. Find the IP address of your printer using the following steps:
    a. Press the “Menu” button on the printer operator panel and navigate to “Reports”.
    b. Use the arrow keys and scroll to “System Data”.
    c. Press the “Select” button to print the system data report.
    d. The printer’s IP address appears near the bottom of the page.

    3. Open up your internet browser and key in the IP address of your printer. Click on “Printer Settings” link.
    4. Then click on the “Update Print Server Firmware”.
    5. After clicking on the link, it will prompt you to enter your printer’s network password. The user name is admin, and by default, the password is 4455. Click OK after entering.
    6. After clicking on OK, you will see the Update Firmware page. Click on Browse to locate your “..._smdall.hd” file.
    7. After locating your firmware, click on the Update Printer Firmware button. You should see the Flash Upgrade message.

    WARNING: The printer update is not fully completed until the printer has rebooted itself and “Ready” message is displayed on the operator panel of your printer.

    The update may take several minutes and during this time, do not turn off your printer or computer or disconnect any cables during the update process. Doing this will corrupt the memory and the printer will be permanently damaged.

    8. The printer re-booted and the LCD panel shows “Ready” message.
    9. You have successfully completed the FW upgrade.

    -------------------------------------------------


    Custom Instructions for Dell1815dn_V1.03.03.08_smdall.hd:

    Updating Firmware on the Dell Laser Printer MFP 1815dn
    ======================================================

    NOTE: Do not turn off your printer or computer, or disconnect any cables during this operation. Doing this will corrupt the memory and the printer will be permanently damaged.

    USB-Connected Printers
    ======================

    Firmware File Name : Dell1815dn_V1.03.03.08_AutoUpgrade.exe

    1. Download the file name “Dell1815dn_V1.03.03.06_AutoUpgrade.exe” on your PC.
    2. Connect your PC to Dell1815dn via USB.
    3. Double-Click the “Dell1815dn_V1.03.03.08_AutoUpgrade.exe” icon to launch the Firmware Update Utility.
    4. When the Firmware Update Utility launches, select the “Local (USB)” option.
    5. Click the “F/W Update” button.
    6. At this point, the utility will begin to download the firmware to your printer.
    7. Once the firmware has been sent, a message stating, “Update Complete!” will be displayed.

    WARNING: Even though the “Update Complete!” message is displayed on your computer, the printer update is not fully completed until the printer has rebooted itself and “Ready” message is displayed on the operator panel of your printer.

    The update may take several minutes and during this time, do not turn off your printer or computer or disconnect any cables during the update process. Doing this will corrupt the memory and the printer will be permanently damaged.

    8. The printer re-booted and the LCD panel shows “Ready” message.
    9. You have successfully completed the FW upgrade.

    --------------------------------------------

    Network-Connected Printers
    ==========================

    Firmware File Name : Dell1815dn_V1.03.03.08_smdall.hd

    1. Download the “Dell1815dn_V1.03.03.08_smdall.hd ” on the desktop of the system that is connected to Dell1815dn through network.

    2. Find the IP address of your printer using the following steps:
    a. Press the “Menu” button on the printer operator panel and navigate to “Reports”.
    b. Use the arrow keys and scroll to “System Data”.
    c. Press the “Select” button to print the system data report.
    d. The printer’s IP address appears near the bottom of the page.

    3. Open up your internet browser and key in the IP address of your printer. Click on “Printer Settings” link.
    4. Then click on the “Update Print Server Firmware”.
    5. After clicking on the link, it will prompt you to enter your printer’s network password. The user name is admin, and by default, the password is 4455. Click OK after entering.
    6. After clicking on OK, you will see the Update Firmware page. Click on Browse to locate your “..._smdall.hd” file.
    7. After locating your firmware, click on the Update Printer Firmware button. You should see the Flash Upgrade message.

    WARNING: The printer update is not fully completed until the printer has rebooted itself and “Ready” message is displayed on the operator panel of your printer.

    The update may take several minutes and during this time, do not turn off your printer or computer or disconnect any cables during the update process. Doing this will corrupt the memory and the printer will be permanently damaged.

    8. The printer re-booted and the LCD panel shows “Ready” message.
    9. You have successfully completed the FW upgrade.

    -------------------------------------------------

    http://support.euro.dell.com/support/downloads/download.aspx?c=uk&l=en&s=gen&releaseid=R138002&SystemID=PRN_ALL_1815DN&os=WLH&osl=en&deviceid=10669&devlib=0&typecnt=1&vercnt=1&formatcnt=3&libid=40&fileid=190655
  • bahree

    6 Posts

    251

    0

    Posted January 27th, 2007 21:00

    Helecj01, that does not fix it - those are steps for how to upgrade the firmware on the printer - which as I had mentioned I already did. There is nothing about the software and the network scanning application that I need to install on the computer. The XP version does not work on Vista. Again I am *not* looking for the firmware.
     
    Thanks.
  • macritchie

    10 Posts

    251

    0

    Posted February 8th, 2007 23:00

    Just FYI, Vista driver for 1815n is now available to download.