UNSOLVED

fresh72

updated

20 years ago

F

fresh72

2 Posts

0

8209

September 7th, 2006 08:00

CD/DVD Printing

I am looking to buy a colour laser printer for home use that can also print on to cd/dvds. Is this possible with the Dell laser range? If not, what else would you recommend? I have already looked at the Canon Pixma IP5200 as an inkjet alternative. Thanks.
  • SEKHIJO

    22 Posts

    715

    0

    Posted September 7th, 2006 14:00

    Hi fresh72,
     
    I havent heard about laser printer for cd/dvd but i can suggest you to look for a thermal printer this type of printer are designed for this type of job you can search in google by putting thermal printer and you will see some brands and pictures, also if you buy those cd/dvds that they are ready to be printed would be great.
  • fresh72

    2 Posts

    715

    0

    Posted September 7th, 2006 18:00

    Thanks for the reply - I will have a look. I only asked for laser printer because i have seen blank printable dvds/cds that are for either laser or inkjet. Maybe I am mistaken. Thanks again.
  • bluestars

    11 Posts

    715

    0

    Posted September 20th, 2006 21:00

    there are (at least) four methods to label a cd/dvd,
    some good, some not so good


    -- hand scribble with a fine point "Sharpie" brand marker, permanent ink
    neatness counts :-)
    keep a light touch, do not press hard

    the Sharpie has worked for me for years.
    if the marker ink is too acidic, it can eat into the dvd top surface
    (a necessary reflective layer)
    and potentially cause problems. So I have been cautious and stayed
    with what I know worked, and avoided other brands.


    -- paper labels,
    typically applied with a press that has a vertical post for the cd/dvd hole
    for registration / alignment of the label.

    danger, NOT recommended !!

    a) offcenter label means a disk spinning at high speed is unbalanced,
    can wobble, leading to scratches, read / write errors.
    50 X is a high RPM.

    b) uses a glue to stick the label onto the cd/dvd
    the glue contains an acid to attach to the cd surface
    over time, the acid continues eating away the top (reflective) surface of the cd/dvd
    over a period of years to a decade, the cd/dvd may become unreadable.

    c) paper labels can be affected by atmospheric temperature / moisture.
    the label can warp, often by small amounts.
    when stuck to a cd surface, causes that surface to warp / bend under tension.
    do you keep your cds/dvds in a temperature / humidity controlled environment?


    -- thermal printer (eg Casio CW-100 Disc Title Printer)
    uses one of 5 colors for the label
    prints in two regions (?? not the entire disk ??)
    can be text or an image
    seems to work, neat, have not heard any problems
    (anyone else comment?)


    -- laser printer (eg LightScribe product)
    does NOT use a regular laser printer.

    special disks are flipped over and put into the computers DVD burner
    (dvd burner hardware must be Lightscribe authorized)
    special driver software uses the dvd laser to write a pattern onto the disk.
    the "color" depends on the original dvd color.

    it is an etching.
    don't know about long term effects, archive questions, 5 or 10 or 20 years.


    hope this helps.

    still looking for definitive answers myself :-)