UNSOLVED

SteveMinor

updated

22 years ago

0

16957

March 18th, 2005 01:00

3100cn "Please Wait Calibrating" -- often? Normal?

With my new 3100cn I find it is often taking longer to print because I'm seeing "Please Wait... Calibrating" in the display.
 
Is this normal?
 
 
Thanks,
Steve
 
  • 638

    0

    Posted March 19th, 2005 21:00

    Hey, doesn't someone with a 3100cn have any comments on this?
     
    I may even notice a corellation between this issue and having the occasional bad output where the toner is messed up (happens around 1 in 10 print outs).
     
    Later,
    Steve
  • SeanFL

    12 Posts

    638

    0

    Posted March 20th, 2005 10:00

    Mine does it a few times an hour I believe...a little annoying.

    Sean
  • 638

    0

    Posted March 20th, 2005 12:00

    Okay, thanks.  That tells me it is likely "normal".  I wonder if other Laser printes do this and simply don't tell us (ie: Dell being overly informative) or if this is a feature of the Dell 3100 series.

     

  • Jarod997

    16 Posts

    638

    0

    Posted April 14th, 2005 15:00

    A few times an hour seems a little excessive, but then again most of my experience is with B&W's.  (My B&W only calibrates when it's turned on, when it comes out of PowerSave or when you tell it to.)  If there is a standby or PowerSave feature, (I'm sure there is, I just don't have the manual or the printer in front of me), try turning that on and you should "calibrate" less often.  What may happen then is that the printer will calibrate just as you bring it out of PowerSave to print a job.

    GL

  • 638

    0

    Posted April 14th, 2005 22:00

    Yes, the 3100cn goes into power save mode (currently 10 minutes).  Thankfully it only re-callibrates rarely, not every time it wakes up.  In fact, I've hardly noticed it doing it, so it isn't a big deal.