UNSOLVED

Squeak825

updated

22 years ago

S

Squeak825

2 Posts

0

4247

December 17th, 2004 00:00

1700n: How is the paper loaded?

We are in the process of converting our payroll check writing to using laser checks, and I have speced out to purchase the 1700n as the printer for the payroll person.

However, when I went to order the checks, I needed to tell them how to stack the checks to ensure they print correctly.

So, my questions is this, for those have the printer, if you do the following scenario, what happens:

- Open up the paper try
- Place a small 'X' on any of the corners on the side facing up
- Print something

What side is the 'X' on? Is it on the printed side, or the non-printed side?

I have a 1600n at home, and the X comes out on the non-printed side. I assume that the engines are teh same, but I want to confirm before we order the checks!

Thanks!
  • 125

    0

    Posted December 19th, 2004 21:00

    I cannot verify this, because my 1700 is currently broken (I'm sure that makes you feel so much better).  From what I remember when performing a similiar test:

    Placing a piece of scrap paper on one side with the printed side up and the top facing me (meaning the text is upside down) into the tray, the printed result is on the blank side of the paper with the tops of each printed side (old and new) being in the same place.

    The 1700n is the same as the 1700 except the 1700n has a network card.  I am waiting to hear from Dell as to the problem with mine (see post about all lights flashing), but I have three Dell laptops at home, two of which refurbished (as is my printer) and they are all working well.  I have confidence in Dell.

    When I get my printer working again, I'll check it out and post to confirm.