I do newsletters among other things on the 1700 printer. I have a problem when printing the reverse side of a page already printed. I either get paper jams or the "load/remove paper" light comes on in error. The help folks have now sent me three reconditioned replacement printers, but the problem doesn't go away. I suspect the slight curve that the paper gets after the first pass is part of the problem. Also, it seems that long jobs are more difficult, maybe heat build-up? The paper is fine. The last time it happened I took about a reem to OfficeMax and it printed just fine on their printer. I really believe its a design flaw.
saw your msg, i have a 1700n, and my printer was jamming on the first page printed in any print job. once i cleared the jam, the print job went along fine. Dell sent me 5 different printers, and all had the same problem with the first page print jam. I, too, think it is a design flaw. I fixed the problem myself after many, many calls, emails, and chats with people from far away places, by uninstalling the printer from the computer, and then reinstalling it. when the popup box told me that the software was installed and the printer was ready to use, i closed out that box and DID NOT go any farther. The software leads to setting up the printer, and that may be where the problem lies. I let the printer figure things out for itself, and it is now working fine.
I have a 1700 lazer printer that is just over one year old and I just put in a new cartidge and now everytime I print something using the bottom tray the sheet jams as it starts to come up out of the tray. I can print single pages from the front loading slot but one one page at a time. Anyone have this happen? Thanks, Mike
thethumb
7 Posts
121
0
Posted April 17th, 2006 21:00