I have a Dell Precision 7730 workstation which I have purchased as being an "open box". I have completed W10 installation and updated all the driver in the correct sequence. However, I was not able to install the Nvidia driver; when checking in Device Manager, the graphics card was not listed. Checked the BIOS and I only have the onboard Intel graphics listed. I was not able to find a setting in BIOS in order to enable/disable the discrete video card. The graphics card installed is a Nvidia P3200, which conforms with the "as built" machine configuration. Power cable from MB to the card is correctly installed, the three board to board connectors are in place, everything looks good. Since the board is not detected (or disabled?), there is no video going to the HDMI or DP ports and external monitors (1 or 2 connected) are not detected. Any suggestions, please help. Thanks.
First of all check if the graphics card is listed in BIOS devices. Check if you physically have a graphics card. Some machines have only the Intel board for the sake of enabling the connection to the HDMI and min DP ports.
If you have a graphics card, you may have a communication error between the card and the MB; one or more of the board to board connectors might be damaged. Also, check the integrity of the DC cable that powers the graphics card. If these check turn to be ok you may have a damaged card.
I have the same problem with Dell Precision 7540 ATI WX3200 does not show up in BIOS and Windows, Uploading the driver from ATI does not detect the connected Graphics. Does anyone have a solution for this?
I've got the exact same issue. Just discovered it, purchased used Precision 7730 from eBay received it yesterday. Will open it up & check the things mentioned in this thread, tomorrow when the backlit keyboard arrives. Build sheet from Dell's site says it was built with an AMD WX 7100, we'll see!?
Ngwazi
1 Rookie
•
1 Message
1696
1
Posted July 8th, 2020 07:00
I have the same problem with dell 7730. I have AMD radon graphic card.