UNSOLVED

potatonian

updated

2 years ago

0

888

August 13th, 2022 00:00

Precision 5570 - SSD Port Enablement Missing in BIOS

One of the reasons of getting this model is due to the dual SSD slots and switching between them for different purpose, as what I have did with previous 55x0 models.

However, to my horror, the BIOS no longer have the option to enable/disable SSD0 and SSD1 individually, even when the manual says they exist (under "Storage Interface/Port Enablement)":
Precision 5570 Service Manual | Dell Singapore

Similar complain has been posted for XPS 15 (9520) here:
Engineering Request: Enable/Disable SSD1 and SSD2 on XPS 9520 in BIOS - Dell Community

This is such an important feature for an engineering workstation. Please restore it.

 

  • Mary G

    6 Operator

    •

    20095 Posts

    397

    0

    Posted August 13th, 2022 14:00

    That model has dedicated slots for ssd drives. See this  from the manual--

    Two M.2 2230/2280 slots for solid-state drive
    NOTE: To learn more about the features of different
    types of M.2 cards, search in the Knowledge Base
    Resource at www.dell.com/support.

    BTW, this is not Dell Support. It's a user to user forum.

  • 380

    0

    Posted August 14th, 2022 05:00

    I knew about the machine having two M2 slots.
    I have both M2 slots populated with WD NVME drives.

    My point is that supposedly BIOS setting that allows user to enable/disable these M2 slots are missing.
    I also know that this is a user forum which is why I posted it here.
    Because apparently, as I mentioned, even Dell's own manual had them wrong.

  • 317

    0

    Posted April 29th, 2023 02:00

    Hi there, 

     

    any solution to this? Facing the same issue here. I ran two operating systems in the past with my precision 5530 in a similar way (one M.2 SSD, one SATA SSD) and in the old bios I was able to disable each of them seperately so they were not at all part of the booting system etc. A really secure way to run two systems in my opinion.

    Now I have the 5570, I also thought "great, two M.2 slots, same procedure"... Manual confirms this option under "storage interface"... but when I got my laptop a few weeks ago there is no such option... 

     

    Why is this removed? Any workaround? I cannot boot two seperate systems if one Windows boot loader is recognized. One needs to be physically disconnedted which was possible before using this option.

     

    Thanks

  • Lesley76

    1 Message

    239

    0

    Posted May 8th, 2023 11:00

    Hi,

    Did you resolve the issue?

    On my laptop the SSD0 SSD1 enable/disable option is not available, but RAID is enabled.

    Could it be possible the option becomes visible when you have RAID disabled?

    I recieved a company laptop (5570), but don't have privileges to change bios settings (can't test for you).

     

    Kind regards, Lesley

  • 229

    0

    Posted May 8th, 2023 19:00

    @Lesley76 ,

    No it doesn't. The option is missing out right from the BIOS.

    And Dell doesn't seem to care.

  • doko24

    2 Posts

    0

    0

    Posted October 14th, 2023 03:17

    I also miss this very much. 

    This option is the best way, to use Windows and also install Linux on the second m. 2.

    Please Dell, make it possible again! Just a bios-update, to enable this option.

    🙏