I have a precision 7520 that i have been running an Asus USB-C display for a long time. Then one day out of no where the display no longer is connecting. It will power up but will say Display Port: No Signal. Then it will go to sleep. I am also unable to hook any external displays to the HDMI port. I am able to hook up other devices to the USB-C port and it works fine. I see that a USB device is not recognized but it has been doing that since day one.
I have tried:
1. Installing new display drivers
2. Install new System Firmware
3. Installing new Thunderbolt Firmware
4. Installing new Thunderbolt Drivers
I checked the BIOS to make sure Thunderbolt was enabled and security was disabled. Nothing is showing in the thunderbolt attached devices.
I downgraded the bios to 1.13. It initially said it failed but the bios screen is showing 1.13. However this did not help.
Oddly when i hooked up my TB16 dock i was able for it to display on the external monitors i have hooked up to the dock. I then undocked it and the Asus USB-C external display was working. However it has since fallen back to its previous state of saying NO SIGNAL.
thebilldolan
12 Posts
1213
0
Posted August 6th, 2019 18:00
Try downgradging the bios back to 1.13. In newer versions they also borked USB PD booting.