We've bought the Precision 3490 company-wide and one of the most frustrating issues right now is the built-in camera randomly disconnecting. You have to log in as administrator, go to Devices and remove it from hidden items.
BIOS is up to date ( I make sure it's up to date by installing it manually ), Windows updates are up to date - Windows 11 Enterprise 10.2.22631 Build 22631.
Any ideas what could be causing this? It happens randomly, the device is not disabkle din BIOS and the only thing you can do is uninstall it.
We are seeing the same thing happen to our Precision 3490 model laptops. The camera works out of the box and then at some point the camera just disappears and the Device Manager shows it was once connected but now showing disconnected device. Same troubleshooting as georgianaconstantinescu. Windows 10 22H2, BIOS updated to latest, removed old drivers, uninstalled and rebooted, went into bios and turned off the camera rebooted and turned it back on in bios and still nothing resolves.
Happening with ours as well. Re-enable in the BIOS, by unchecking/checking camera integration, then at some point issue happens again. Very frustrating
I had this issue and went to replace it with a Latitude 5420 camera (mounting points seem to be the same). When I went to swap it out, I realized the cable to it was ever so slightly ajar. I reseated the cable and then had to enable the camera in the BIOS (the bios setting will be there if it sees a camera). Worked for me.
Same here—my webcam suddenly stopped working. I've already installed all the necessary updates, but what's strange is that it's not showing up in Dell SupportAssist's hardware list nor in Device Manager. It's as if the camera doesn't exist at all.
@Kokix We've discovered that if we disable it in the BIOS, then re-enable it, the camera comes back. Also, going to Dell's site there is now a Camera Firmware Update Tool
<ADMIN NOTE: Broken link has been removed from this post by Dell>.
So far, this tool has kept the problem at bay, and we are not getting calls for camera attachment errors on the Precision 3490s.
Bohlszach
2 Posts
•
8 Points
8
1
Posted November 3rd, 2026 09:44
for the Precision 3490 model I used L211 UPD IR Camera Firmware Update Utility | Driver Details | Dell US . After installing, it will prompt for a restart. Confirmed with my user that it's working.