
UNSOLVED
Precision T5600 + Tesla M40
Hello,
I am attempting to install Tesla M40 GPU accelerator into Precision T5600 but with installed system gets hung up in POST with error code 2. Per this Dell Support Article, I have set PCI MMIO Space Size to "Large". Other similar forum posts point to setting to "Above 4G decoding" and "Disabling CSM" or "Enabling Secure Boot" but I do not see any options in the BIOS Settings menu to change these parameters. Any help in solving this would be greatly appreciated, or is the Tesla M40 simply incompatible with this MB?
My setup:
BIOS: Revision A19
OS: Windows 10 Pro
CPU: 2x E5-2687W
RAM: 8x16GB 1600MHz DDR3
GPU: Nvidia Quadro 4000 (looking to upgrade as well)
Storage: 1TB M2 NVME SAMSUNG EVO 970 SDD, 250GB SATA3 HP S700 SSD
PSU: 675W (have ordered 825W version)
Responses (5)
Solutions (0)

Andy812
2 Intern
•
202 Posts
1512
0
Posted March 11th, 2021 16:00
On 5820 there is a bug of BIOS getting non-bootable when you replace ANY graphics adapter.
After switching/adding GPU boards, reset the bios with battery. There is another useful option of "os recovery mode", or something like that. After 4 failed attempts it boots in fail-safe mode allowing you to tune BIOS, but not resetting previous settings... it records the new GPU board PCI footprint at that time, so the next boot would succeed.
So,I am not sure, but you cold try resetting BIOS with the battery.