UNSOLVED

A.P. Richelieu

updated

1 month ago

AP

A.P. Richelieu

1 Rookie

•

12 Posts

0

211

June 2nd, 2024 08:53

Need help with T3610 motherboard in T5610 chassis

I bought a T5610 on eBay at a bargain price of £50, but when it was delivered it turned out to have a T3610 motherboard, and further studies indicates that the machine is a T3610, and the only thing related to the T5610 is the marking on the front. I don’t need another T3610 so I got a refund and was told that I could keep it due to the cost of shipping it back.

 

I do have a spare T5610 motherboard so I thought that perhaps this would fit.

It can be mounted inside the chassis, but appear to lack the nuts/distances for the CPU fans. 
There should be 2 x 4 nuts/distances. There are only 2 useable.

The machine is at another location, and I did not have time to remove the motherboard and check before leaving for home.

 

  1. Anyone tried putting a T5610 motherboard in a T3610 chassi?
  2. Are there holes in the chassi to fit the missing 6 nuts/distances or are they fixed?
  3. Can you get hold of spare nuts/distances anywhere?
  4. If mounting using ordinary nuts, which one?

(edited)

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    4

    0

    Posted June 2nd, 2024 22:08

    sorry this may not be of any help but more like a discussion:

    3610 has 1 cpu socket

    5610 has two.  

    the cpu heatsink is mounted on 4 studs of chassis tray so you will need to map out and drill the 3610 tray to install two sets of studs for 5610 board.

    chassis dimensions and back IO layout appear identical

    Physical
    FEATURE SPECIFICATION
    T5610
    Height (without feet) 414.00 mm (16.30 inches)
    T3610
    Height (without feet) 414.00 mm (16.30 inches)
    T3610 / T5610
    Width 172.60 mm (6.79 inches)
    Depth 471.00 mm (18.54 inches)

    (edited)

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    5

    0

    Posted June 3rd, 2024 02:18

    Since I did not put a T5610 motherboard in a T3610 chassis, I could not provide much helpful information.  But, in this case, if seller put a T3610 motherboard into a T5610 chassis.  It should properly fit without chassis modification.  PC assortment screws kit can be sourced from big shopping site. 

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    5

    0

    Posted June 3rd, 2024 03:08

    Re: the machine is a T3610, and the only thing related to the T5610 is the marking on the front.   It sounds like a 3610 chassis with a 5610 logo.  5610 INO.

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    6

    0

    Posted June 4th, 2024 03:19

    "INO" meaning doesn't come up in Google.

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    7

    0

    Posted June 4th, 2024 06:05

    lol, I did think of using google.  I just guessed the context to complete the sentence, 5610 In Name Only.

    As for my comment, I did clarified that I could not be much help since I did not put a T5610 board into T3610 chassis.  But I remembered Dell used standard PC screws to mount motherboard for T5810.  Hence the suggestion for PC assortment screws kit.

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    8

    0

    Posted June 5th, 2024 03:05

    Actually, it's a T3610 MB in a T5610 chassis.  Title in op had it reversed.  So I edited it.

    (edited)

  • otacon6530

    1 Rookie

    •

    1 Message

    •

    5 Points

    8

    0

    Posted October 16th, 2026 02:55

    I have done the same thing. I am putting a Dell T5610 Motherboard in a Dell T3610 case because the motherboard died and I said "why not add a second cpu". Well.... it is trouble I tell you. 

     

    The obvious,

     

    1). You should buy a second cpu and cooler now that you have 2 instead of 1.

    2). The T3610 cpu cooler will not fit the holes and mounting stands for the T5610 motherboard.

    3). The CPU cooler holes in the motherboard do not line up with the chassis.

     

    I plan to adapt the T3610 cpu heatsinks as they are cheap and add some standoffs with JBweld to fully support the heatsinks and parts of the motherboard. 

     

    I will let you know how it goes.