Can you supply some more details about exactly what happened and how the disks are set up? (can you post a screenshot?) What led you to check in the Megaraid BIOS? Do the disks all have the same level of firmware? Please try clearing the event logs from the Megaraid BIOS.
I am dealing with a similar situation. If I use a larger hard drive, I currently have 1 TB and want to go to 2TB, can I just rebuild on a 2TB drive and then swap out for the currently working 1TB drive for another 2TB drive and rebuild again will I be able to use the whole 2TB drive or will it be partitioned. What would I need to do to have access to the whole 2TB drive.
Replacing a 1TB disk in your array with any disk larger than 1TB won't by default utilize the extra space on that disk. The resulting array would then need to be expanded at the controller and OS level to recognize the new space.
Alternatively you could create a new array with the 2TB disks and copy the data over from the original array.
DELL-Alasdair R
6 Operator
•
754 Posts
12875
0
Posted February 1st, 2018 05:00
Hi bjudas,
You just need to set the new disk as a hot spare, it should then rebuild automatically.
http://downloads.dell.com/manuals/common/rc_h310_h710_h710p_h810_ug_en-us.pdf (page 56)
Let us know how you get on.