UNSOLVED

Gashish

updated

18 years ago

G

Gashish

7 Posts

0

27539

October 28th, 2008 02:00

Terminator for PV TL2000

I have PE2900 with 5/e SAS adapter and PV TL2000 connected to server with one cable. Do I HAVE TO terminate the second SAS interface on the library. Just to clarify. If "yes", can I use iSAS-88LB Loopback Adapter for Mini-SAS 26-ckt SFF-8088 in this case, coz no any terminator was handled with the library from vendor.

Thanks for an advance.

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    369

    0

    Posted October 28th, 2008 11:00

    There is no such thing as a terminator for SAS devices.
  • Gashish

    7 Posts

    369

    0

    Posted October 29th, 2008 02:00

    Ok, but what about iSAS-88LB Loopback Adapter for Mini-SAS 26-ckt SFF-8088. Is this not terminator?

    Doesn't matter...

    I have a problem. In Computer Management console there are two devices: MediumChanger

    (IBM TotalStorage 3573 Tape Library) and Tape drive (IBM ULT3580-TD4 SCSI Sequential Devise). Tape 

    drive with exclamation mark (Windows cannot initialize the device driver for this hardware). So when I try to

    configure device in BrightStore ARCserve Backup, application stucks.  OnceARCserve recognized library, but

    started updating slots and this process wasn't complited, it continued for 2 days(!) without any success.

    So in this case I thought about terminator for second SAS interface on the library, maybe it should be terminated somehow?

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    369

    0

    Posted October 29th, 2008 11:00

    What is the exact error on the device when you look at the properties? It should have an error code. Doing a Google on that can yield some ideas.

    Also; backup applications use their own drivers. If Windows has a driver installed for the device it could cause the Windows native backup service/application to get a lock on the drive/changer and prevent the backup application from using it.

    Did you try disabling the device in device manager and then see if Arcserve can then use the device?

  • Gashish

    7 Posts

    369

    0

    Posted November 10th, 2008 18:00

    I resolved the problem by re-installing drivers for Tape Drive. Now Windows can see it normaly as the ARCserve.

    But find out a new one... In specification list (for BrightStore ARCserve) listed that PV TL2000 should have 74H8 FW version. I have newer 8371. I tried to downgrade FW, but recieved an error: "Invalid FW type". Is it possible to downgrade FW?