I am having a problem getting Backup Exec V10 to see the autoloader of my 124T LTO3. It is connected to a 39160 (supplied with the 124T). I am faimailar with other auotloaders that have two SCSI IDs - one for the tape and the other for the loader. The 124T has one SCSI ID for both devices. Windows 2003 sees both the tape and the loader. I have the Veritas drivers loaded for the tape drive and "unknown" for the loader. I have tried using Adaptec drivers for the 39160 (instead of Microsoft) but that doesn't help. BE sees the tape without a problem but not the loader. I have tried uninstalling the Veritas drivers (restarting the server) and reinstalling them but that did not help as well as disabling the Enable Robotic Support option in Device Manager.
What is the entire version# of BE that are you using? (Help-About from the BE GUI will give you this #) Have you verified that the 124T is on the compatibility list for the version you are using?.... support.veritas.com will have the listing.
If windows sees the changer and the drive the problem lies with BE recognizing the loader. If you find the changer is a supported device you just need to load the latest .DDI from veritas and re-run the device configuration.
The 124T is a LUN based device, meaning that the changer is a logical unit of the drive rather than having its own SCSI ID.
I deleted HKey_Local_Machine | System | CurrentControlSet | Control | SCSIChanger and deleted any Veritas drivers for the LTO3. I then reinstalled BE V10 and it found both the drive and the changer.
I have one more question: What is the login name and password for the web interface for the 124T? I have tried admin and 000000 and 00000000 and I am unable to log into the unit.
DELL-Bob D
1 Rookie
•
899 Posts
694
0
Posted January 23rd, 2007 14:00