UNSOLVED

fmetz

updated

14 years ago

F

fmetz

2 Posts

0

183975

September 11th, 2012 09:00

Powervault MD3200 and Windows Server 2012

Anyone try this yet?  Does W12 have the built in drivers for the HBA?  Thanks,

fmetz

  • DELL-Kenny K

    1 Rookie

    •

    685 Posts

    1740

    1

    Posted September 11th, 2012 10:00

    At this point Windows server 2012 is not included as a supported OS for the PowerVault MD3200. Below is the support matrix for the MD3200.

    support.dell.com/.../matrix.pdf

    Please let me know if there is anything else I can assist you with.

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1740

    0

    Posted September 12th, 2012 04:00

    It's not just the HBA drivers that you need; you also need the MD-series-specific MPIO driver.

    Until Dell releases an updated resource DVD (that includes the 2012 MPIO driver) I wouldn't suggest trying it in any kind of production environment.

  • glavelle

    2 Posts

    1740

    0

    Posted September 17th, 2012 11:00

    Do you know when 2012 will be supported? Is it in the pipeline?

  • DELL-Kenny K

    1 Rookie

    •

    685 Posts

    1740

    0

    Posted September 17th, 2012 11:00

    At this point I have not heard anything about an ETA regarding Windows Server 2012 and the PV32XX line. I would recommend to just keep an eey on the support matrix on the support website.

  • steeveeh

    1 Message

    1740

    0

    Posted October 16th, 2012 04:00

    Hi There,

    Further to the above, are there any time-scales available for when these updated drivers are likely to appear? Specifically talking about the MPIO drivers.

    Are there any beta drivers we can test?

    We have a batch of MD3200's being delivered and for obvious reasons want to deploy WS2012 and are hitting a bottleneck with this support.

    Appreciate any guidance... even a rough timescale will be an advantage? 

    Thanks

  • DELL-Sam L

    Community Manager

    •

    8150 Posts

    •

    34715 Points

    1740

    0

    Posted October 16th, 2012 10:00

    Hello steeveeh,

    There is currently no new time table for MPIO drivers & MDSM iso.  Currently the time table is set for March or April but could be released as early as February. There are currently no beta drives for the MD3200 & haven’t had any released for the MD3200 as well.

    Let us know if have any other questions.

  • glavelle

    2 Posts

    1740

    0

    Posted October 17th, 2012 03:00

    I'm a bit confused and hope you can help.  I'm currently running a MD3200 with windows server 2012 connected via 2 x SAS/6E cards on separate server, so generally using it as an external raid drive.  I setup the MD3200 via the network on another PC and was able to configure things fine. Everything seems to work okay and I can access the virtual drives without issue.  Are you saying this si unsupported and may cause problems with data transfer / corruption?

    Regards,

     

    Greg

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1744

    0

    Posted October 17th, 2012 08:00

    This is correct; as the current MPIO driver hasn't been validated (or may have failed validation), Windows 2012 is an unsupported OS at this time and there is a chance that if a raid controller failover were to occur, you lose connectivity to your storage and possibly even end up with corrupted data.

    This is why with SANs you always first verify with the SAN vendor for support on a new OS before you upgrade to this new OS.

  • DELL-Sam L

    Community Manager

    •

    8150 Posts

    •

    34715 Points

    1744

    0

    Posted October 17th, 2012 09:00

    Hello glavelle,

    Yes as Dev Mgr has stated is correct that since Windows 2012 is not supported that it is best effort support if an issue was to arise.  Once Windows 2012 is supported then support will be normal if you have any failures.

    Let us know if you have any other questions.  

  • dmmillr1

    3 Posts

    525

    0

    Posted October 25th, 2012 07:00

    whats the reason behind the delay?  with ho wbig hyperv 3 is, and how its been available for testing since May, this is a HUGE dissappointment