
UNSOLVED
EJ
einar.jensen
1 Message
0
5876
February 13th, 2008 06:00
omreport shows wrong firmware for PV220S?
I've just updated my PV220S firmware to E19.
But omreport still gives E17 as the installed firmware.
When I try to install the firmware again, i get the message that E19 is already installed.
What is correct? is E17 or E19 installed?
How to deal with this issue?
The PV220S is in split-bus Mode, and I'm only updating one of the EMMs
But omreport still gives E17 as the installed firmware.
When I try to install the firmware again, i get the message that E19 is already installed.
What is correct? is E17 or E19 installed?
How to deal with this issue?
The PV220S is in split-bus Mode, and I'm only updating one of the EMMs
Responses (1)
Solutions (0)

Storagetalk
221 Posts
133
0
Posted February 13th, 2008 15:00
Update the other EMM. If you're trying to flash the FW and it's telling you that it's already E.19 then I'd trust that over any report. If you have both EMM's on E.19 then your report should reflect fine.