UNSOLVED

Aloron

updated

15 years ago

A

Aloron

25 Posts

0

127427

March 6th, 2012 13:00

MD3000I Hard Drives

Hi Everyone,

the guy before me order some hard drives to add to the SAN that is installed here in the office .. the draw back is he just got hard drives from office depot .. I know that you need the dell firmware on the hard drives to get the SAN to see them ..

So my questions is , dose anyone know of a way that I can flash the hard drives to the dell firmware so the SAN will see them ?

any advice would help ..

Thansk ..

  • DELL-Kenny K

    1 Rookie

    •

    685 Posts

    1117

    1

    Posted March 6th, 2012 14:00

    Aloron,

    Unfortunately, there is no way to get those drives to work with the MD3000I. The MD3000I SAN has certain drives that will work in that unit. What you will want to do is look into getting the hard drives that are supported that way you will be able to get the current firmware on the drives and you will not have to worry about any compatibility issues.

    support.dell.com/.../Sup_Matx.pdf

    If you go to the bottom of page 10 you will see the list of supported hard drives. Feel free to let me know if you have any further questions.

  • JOHNADCO

    2 Intern

    •

    847 Posts

    1117

    0

    Posted March 7th, 2012 06:00

    They have to be dell enterprise drives.   The same exact model doesn't work if it is not a Dell enterprise drive.

  • Aloron

    25 Posts

    1117

    0

    Posted March 7th, 2012 08:00

    Hmmm ok , but then why I have read on the fourms and on the internet that if you use some 3rd party program or the dell diagonisc tools , that you can flash the hard drive with the dell firmware and it will work ..

  • JOHNADCO

    2 Intern

    •

    847 Posts

    1117

    0

    Posted March 7th, 2012 12:00

    It would be a usefull tool.    I tried one out some years back and it did not work.

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1117

    0

    Posted March 9th, 2012 07:00

    Your only option is to return the drives if you can and then buy Dell MD3000 certified drives (from Dell or you can look online for other vendors that offer Dell certified drives as well (they typically were purchased in a unit from Dell and upgraded or something like that).

  • 1117

    0

    Posted March 19th, 2012 08:00

    To be fair, that is a very poor answer as to why we can't buy our own hard drives from anyone else than Dell. The cost difference is very high. I can buy a 1 TB drive from Dell for $319.99, or a 2 TB drive (that is on the supported hard drive matrix sheet) for $371 from CDW. Why should I not be able to use this drive?

  • DELL-Kenny K

    1 Rookie

    •

    685 Posts

    1117

    0

    Posted March 19th, 2012 10:00

    The reason is because of the firmware on the drives but unfortunately we do not have a tool that is able to make 3rd party drives useable in the MD3000 system.