piaakit1210

updated

3 years ago

P

piaakit1210

1 Rookie

•

19 Posts

0

1148

January 30th, 2023 02:00

Configure Dell MD1420 question

Dear All, 

 

          I have a Dell 650xs server with 2 SAS card connecting to MD1420, and just wonder how do i configure the raid setting on MD1420 ? is it from the Dell 650xs bios ? or there is a software to do it ? any help would be appreicated 

 

Keith 

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    667

    0

    Posted February 3rd, 2023 00:00

    Check your cabling by reading the manual again...start at age #7. The PERC H840 have also the cabling guide inside.

    1. power on MD14x0 first
    2. wait a min. and than power on the Server

    The non-RAID HBA have green LEDs .... not sure if the H840 has also connection LEDs.

    After that enter the system setup again and create a RAID ... you can list the phys. Disks also.

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    701

    0

    Posted January 30th, 2023 04:00

    Dell offer a full blown Raid Card (Hxxx) or a simple passtrough (HBAxxx) one.  The later doesnt support "RAID".  So which card do you have?

    Edit: You need the H840 for a HW Raid.

    Regards,
    Joerg

  • piaakit1210

    1 Rookie

    •

    19 Posts

    701

    0

    Posted January 30th, 2023 05:00

    i check the quote we have PERC H840 RAID Adapter for external MD14xx, so for the MD1420 storage configuration, i can do it through the Bios in the 650xs server ? or can it be done throught the "OpenManage" ? thanks 

  • piaakit1210

    1 Rookie

    •

    19 Posts

    697

    0

    Posted January 30th, 2023 06:00

    may i ask i can also download "OMSA" to do the configuration ? 

     

    keith 

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    699

    0

    Posted January 30th, 2023 06:00

    Within the iDRAC WebGUI there is a "storage" section. I didnt like this because it creates configuration JOBs instead of a "do it now" like behavior.

    "I" prefer to open the console (trough iDRAC) and choose "setup" as next boot option and the server boots into system setup and than "devices" -> H840.

    Regards,
    Joerg

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    696

    0

    Posted January 30th, 2023 06:00

    For sure you can edit the existing Virtual Disks within OMSA  but am unsure about the RAiD creation.  We need the RAiD before the OS installation and not after it.

    its a 90sec job.

    Regards,
    Joerg

  • piaakit1210

    1 Rookie

    •

    19 Posts

    677

    0

    Posted February 2nd, 2023 20:00

    i have just powered on the MD1420, and access the Openmanage but could not detect the MD1420, also tried to access the PERC H840 RAID bios, it seems that it doesnt detect the MD1420 storage, any idea what goes wrong ? 

  • adamjason

    1 Message

    669

    0

    Posted February 2nd, 2023 23:00

    You configure the RAID on the PERC.  Depending on your PERC:  

    https://www.dell.com/support/article/en-us/sln292296/raid-installation-and-configuration-in-a-dell-p...  

     

    (edited)

  • 674

    0

    Posted February 2nd, 2023 23:00

    I am also facing the same issue, If any buddy have a valid solution please share with me thank you

     

    (edited)

  • piaakit1210

    1 Rookie

    •

    19 Posts

    138

    0

    Posted February 3rd, 2023 00:00

    i powered on MD1420 first and wait 10 mins then power on RS650xs and checked 12g-sas-4 emm port 1 has no solid green light, as well as the port 2 as well, but in the RS650xs i can see the PERC H840 detected in device manager