
UNSOLVED
Cabling for expansion Powervault
We have a R710 server that has an existing attached MD3200 Powervault. We want to add another MD1200 Powervault to increase capacity. We can daisychain it to the MD3200 or plug it directly into the R710 so that both the MD3200 and MD1200 would be plugged into the R710.
The question is , which of the proposed cabling options offer better performance or does it matter? Thanks.
Responses (1)
Solutions (0)

DELL-Sam L
Community Manager
•
8148 Posts
•
34709 Points
355
1
Posted November 13th, 2015 08:00
Hello Tarchivem,
There isn’t much of a difference in performance in either way that you cable the MD1200 as both the MD3200 SAS out ports and the PERC will run at 6gb speed. The biggest thing that you need to be aware of is that if you connect the MD1200 to a PERC card in the R710 then it will not be able to see the MD3200 & the virtual disks. It is best to connect the MD1200 to your MD3200.
Please let us know if you have any other questions.