backup exec 10d wont see my 132t library, only the drives
I am running the latest revision of backup exec 10.1 on windows 2000 sp4.
Under the Device Manager, I see "Dell(TM) Powervault (TM) 132T Tape Library" listed under Medium Changers and 2 "IBM Ultrium III tape drive" listed under Tape drives. So it seems that Windows is seeing the devices just fine.
Under Backup Exec, however, I only see the tape drives under the Stand-alone Drives and nothine under the "Robotic Libraries".
does backup exec see the unit under devices? One easy way to get backup exec to see the unit, is to turn off the changer. remove tape drivers from Backup exec, delete any drives under standalone. Then, re power changer, run the device wizard within Backup exec, In addition, make sure all hot fixes and patches are applied.
We ended up having to call Dell technical support on this and after hours of trying different things they were able to find the problem. Turned out there was a second 132t medium changer listed in the Device Manager that was disabled! This was hidden from view as well so we couldn't see it until we chose "show hidden devices" from the View menu in Device Manager.
Jan_C_7e4250
22 Posts
411
0
Posted December 8th, 2006 05:00