We had a strange problem on Friday. One of the links of the disk shelf went down for almost a minute. No one physically touched the cables at that time.
Where in the logs can I see information about this error?
The event code 0x00307401 indicates that the XMS_FEPORT_PORT_STATE_UP alert has been raised. This alert signifies that the Ethernet FEPort is in a healthy state after previously being down.
Key Details to note:
Alert Status: The port status has transitioned from down_in_use to up.
Context: This alert may occur following temporary issues with the Redfish response while checking the Bluefield port status, particularly in appliances with NVMe expansion enclosures.
System Impact
There are no significant impacts reported on the system when this alert is raised, as it indicates a return to normal operation for the port.
Note: This issue isonly affectedto an appliance with NVMe expansion enclosures.
From the alert list, alert XMS_FEPORT_PORT_STATE_DOWN_IN_USE is raised for about 2 minutes (one Redfish cycle), Event code 0x00307404.
2024-01-28 06:16:33.883415+00:00 2024-01-28 06:16:23.046476+00:00 ExpansionEnclosure_5_1-SAM1-BEPort1 aa6a6f1ca94a4e8d84b4b2b84b5002c7 XMS_FEPORT_PORT_STATE_DOWN_IN_USE 0x00307404 up down_in_use
2024-01-28 06:18:35.113084+00:00 2024-01-28 06:18:23.203806+00:00 ExpansionEnclosure_5_1-SAM1-BEPort1 aa6a6f1ca94a4e8d84b4b2b84b5002c7 XMS_FEPORT_PORT_STATE_UP 0x00307401 down_in_use up
In addition, the below is seen in cluster logs:
Jan 28 06:16:23 FNM10213500534-A xtremapp-pm[44687]: 2024-01-28 06:16:23.045130 P [log_id:12049][4996(5046 nb_truck_0_pm 0xf000c316080 )][][INFO] pm_misc.c:pm_misc_long_log_prefix:1837: update_feport_in_mom: updating Ethernet FEPort object in MOM: SN=<be:34-0>, changes: port_status: 3->2 port_state: MGMT_FEPORT_HEALTHY->MGMT_FEPORT_LINK_DOWN_IN_USE
here the alert was cleared
Jan 28 06:18:23 FNM10213500534-A xtremapp-pm[44687]: 2024-01-28 06:18:23.202339 P [log_id:12049][4996(5046 nb_truck_0_pm 0xf000c316080 )][][INFO] pm_misc.c:pm_misc_long_log_prefix:1837: update_feport_in_mom: updating Ethernet FEPort object in MOM: SN=<be:34-0>, changes: port_status: 2->3 port_mac_addr: ->006048614B48 port_state: MGMT_FEPORT_LINK_DOWN_IN_USE->MGMT_FEPORT_HEALTHY port_speed: MGMT_PORT_SPEED_UNKNOWN->MGM
T_PORT_SPEED_100Gb
Before the Alert, the below logger can be seen while parsing the Redfish Bluefield:
(there is typo, the logger mean Couldn't)
Jan 28 06:16:15 FNM10213500534-A xtremapp-pm[44687]: 2024-01-28 06:16:15.094492 X [log_id:0][4996(6133 [OS Thread] )][][INFO] pm_indus.c:pm_indus_set_cx5_intfcs_cb:6321: INDUS_POLLER CRIT: Could parse counters objects
Cause
This issue is caused due to hiccups during the Redfish response for the Bluefield port status.
Resolution
This issue was resolved in PowerStoreOS version 4.1 (or later).
So you are talking about error code 0x00307404, and I actually have 0x00307401. In the PowerStore_Events_and_Alerts_Reference_Guide document, I found my error 0x00307401. But there is no information on it. I have attached a screenshot from this document.
And in realese note 4.1.0.0 I did not find that this problem was solved with this error. Please point out where it is written.
The message you received was in informational message. You will need to look at the same logs before the informational message and see if there are any warning or critical messages, as those will tell you what errors were happening.
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
0
0
Posted March 31st, 2025 16:51
Hello sabir-9900,
The event code 0x00307401 indicates that the XMS_FEPORT_PORT_STATE_UP alert has been raised. This alert signifies that the Ethernet FEPort is in a healthy state after previously being down.
Key Details to note:
Alert Status: The port status has transitioned from down_in_use to up.
Context: This alert may occur following temporary issues with the Redfish response while checking the Bluefield port status, particularly in appliances with NVMe expansion enclosures.
System Impact
There are no significant impacts reported on the system when this alert is raised, as it indicates a return to normal operation for the port.
Here is a link to a kb that has some additional details. https://www.dell.com/support/kbdoc/en-us/000296120?lang=en