
UNSOLVED
PowerPath Migration from VNX to XtremIO getting Target is not accessible errors
We are unable to get this to work like we have done in the past with Clarion to VNX. I am hoping someone here can shed some light for us. The luns can be seen in powerpath gui and in disk mgmt. Traget is only Online. We run the following commands:
List the LUNs:
powermt display dev=all
powermig setup -techType hostcopy -src harddisk1 -tgt harddisk2
And it comes up with an error saying:
PPME error (60): Target is not accessible
Below is a copy and paste of the disks:
>
Responses (4)
Solutions (0)

nizmoz44
9 Posts
860
0
Posted June 19th, 2015 13:00
Thanks for the info. EMC support is also stumped. For a Windows Physical server it needs to be 4k blocks as per EMC documentation and only VMWARE uses 512.