Hello, On a AIX system, I see many "defined" disks when executing "lsdev -CCdisk" command, the disks are
still there but the hdiskpowerX and hdiskX numbers X have changed, the applications are working. I want to get the right kdiskpower numbers, I think that I should remove all the disks first (rmdev) and
execute "cfgmgr", is it right ? Or should I clean powerpath ?
If you make sure your applications are working on the available hdiskpower devices without any single path failure or any "defined" state of hdisks managed by PowerPath and the hdiskX you're going to remove are never used, try rmdev -dl hdiskX will removed the old definition of hdisk, then after run cfgmgr, the hdisk wouldn't appear again.
Fenglin1
6 Operator
•
2074 Posts
2336
0
Posted March 20th, 2014 01:00
hdiskpower or hdisk display as "defined" ? The "defined" state normally means the device is inaccessible from host.