
UNSOLVED
XP Embedded on PE 2950
I am attempting to install XP embedded on a 2950 as a proof of concept for my company. Needless to say it is not proceeding well. The very first step in an embedded OS build is to capture the target platforms devices drivers with a tool called TAP.EXE. This tool only runs on Windows XP. So, my first step is to install XP on this 2950.
My only disks are a pair of SAS drives in a raid-1 config. So I must add the RAID support for this machine using the Dell support drivers. I have tried using the DELL USB Key Prep utility to trick the server into thinking it has a floppy drive, but every time I boot the OS install disk, I receive an error stating that Line 1 of txtsetup.oem contains an error and setup cannot continue. I have read the readme.txt that accompanies the the USB key utility and it states that no changes are required to this file for PERC 5/i controllers. (even if there were changes required, the readme does not state what those changes might be). I am at an impasse and would greatly appreciate some direction on how to simply get Windows XP installed on this device.
Thanks in advance,
Vince
My only disks are a pair of SAS drives in a raid-1 config. So I must add the RAID support for this machine using the Dell support drivers. I have tried using the DELL USB Key Prep utility to trick the server into thinking it has a floppy drive, but every time I boot the OS install disk, I receive an error stating that Line 1 of txtsetup.oem contains an error and setup cannot continue. I have read the readme.txt that accompanies the the USB key utility and it states that no changes are required to this file for PERC 5/i controllers. (even if there were changes required, the readme does not state what those changes might be). I am at an impasse and would greatly appreciate some direction on how to simply get Windows XP installed on this device.
Thanks in advance,
Vince
Responses (1)
Solutions (0)

tommo666
4 Apprentice
•
1211 Posts
90
0
Posted November 26th, 2007 15:00