UNSOLVED

boy141

updated

3 months ago

B

boy141

1 Message

0

5276

August 28th, 2003 20:00

POWEREDGE 6300 setup with win2k3

PowerEdge 6300
 
Can someone help me how to install my raid and include links
to the raid drivers and which raid card do i have?  It get to
the OS screen and it says "cannot find hard drives"   I am fairly
new at this and I tried to look up the config for the server,
but it doesn't list it.   When I use a floppy with the drivers downloaded from the website it automatically selects the 2nd driver on the list.  is this normal?  did i set up my raid right?  help me out with steps
 
I have the Dell OpenManage Server Assistant v. 7.4 from dell but it doesn't list 4300 but 4400. 
  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    201

    0

    Posted September 2nd, 2003 16:00

    Hi,

    These are the latest System Upgrades for the PowerEdge 6300 and running Win2003.

    System BIOS (Windows Server 2003), PowerEdge 6300, A13
    FileName:  PE6300-BIOSA13.exe [477 KB]
    Release Date:  6/17/2003
    http://support.dell.com/FileLib/Format.aspx?ReleaseID=R57970

    ESM Firmware, Multi System, A42
    Filename: a42cust.exe (397 KB)
    http://support.dell.com/us/en/filelib/download/index.asp?fileid=R14563
    Note: Extract the files to a DOS bootable floppy disk. Boot the server to this floppy disk, and run smflsh.exe

    This system shipped with the original PowerEdge Expandable Raid Controller (PERC) II. This controller is not supported by Microsoft on Win2003. There are no drivers available.

  • prisma

    6 Posts

    201

    0

    Posted February 19th, 2004 22:00

    Do I understand this reply to mean that you CANNOT use the Perc II with Windows 2003 even with the latest patches installed?

    thanks

    Phil

     

  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    201

    0

    Posted February 24th, 2004 19:00

    Hi Phil,

    Actually I have seen several reports here on the Forums of the Perc II working in the Win2003 Operating System. In each case the Win2000 drivers were used. I do not know the reliability of the configuration though. Neither Dell or Microsoft has officially validated the controller.

    Thanks for using the Dell Community Forums!

  • 201

    0

    Posted March 8th, 2004 20:00

    Oh it's valid alright. We posted our findings last week. The trick is to install on a partition 7GB or less. Try it out.

    Good luck.