I am trying to install a PE1750 onto my NT domain. The error I am getting is when I load the NIC driver. I get an error message showing "Network card is not installed". I have tried different versions of the driver and am wondering if anyone has run up against this problem. And if so, were you able to get the NIC to work.
PE1750 has all the latest updates. Trying to make this box a BDC.
Below is the filename and a link to the latest set of NT drivers for your system's dual embedded Broadcom NetXtreme adapters, version 6.1, which should allow NT to properly detect the controllers:
Also, I'd recommend ensuring that your system's embedded Broadcom controllers are both enabled in BIOS. To do so, enter system setup during POST by pressing F10, then choose Integrated Devices, and setting both NICs to Enabled.
Thanks for the info, but I have tried this already. I have also tried different versions of the driver from Dell and Broadcom. This is the only obstacle keeping me from putting this server on line. The message is still the same - Network card not installed. Just for arguements sake , I installed Windows 2000 on this same server without problem. It joined the domain immediately. So I know the NIC and cable to the switch are good. Any more ideas?
Needed third party drivers to get things working. Had to get the NIC drivers from the chipset vendor and snagged the video drivers from a PE 1650 install CD.
Pain but got it working. Only thing is can get OpenManage to install.
I wish the PE 1650 was still in production as I would still buy it for NT installations.
I am trying to install a BDC for an existing NT 4.0 domain. Since I am forced to use the NT4 boot CD and additional drivers, how can I get to a point where I can install SP6? I cannot even complete the OS build since the machine is a domain controller.
The NT4 manual build has no problem recognizing the drivers, however when attempting to join the domain I am getting "domain contoller cannot be contacted". The NICs do not appear to be correctly communicating on the network. W2K has no issue on the same cable. I really believe this is a service pack issue, and the Broadcom drivers are not working properly on the NT4 SP1 build. Of course if there was an OMSA build for NT4, or a slipstreamed version of NT4 with a higher SP level....
We are still maintaining an NT4 domain structure here at least through mid-year. Our transition plan was to upgrade our 75+ NT4 DCs to PE1750s... without a solid resolution we'll have to send them back.
actually, this whole issue is a hal problem. the 1gb broadcoms don't work with anything less than sp4. if you put the i386 files on a fat16 partition or network share, copy the hal.dll and halapic.dll to the i386 folder and install nt with a winnt/b, you are home free. good luck to all!
David D.
1 Rookie
•
39 Posts
416
0
Posted January 14th, 2004 15:00
Hi,
Below is the filename and a link to the latest set of NT drivers for your system's dual embedded Broadcom NetXtreme adapters, version 6.1, which should allow NT to properly detect the controllers:
BCOM_LAN_61_NT4_A05.exe
http://support.dell.com/filelib/download.aspx?FileID=90601
Also, I'd recommend ensuring that your system's embedded Broadcom controllers are both enabled in BIOS. To do so, enter system setup during POST by pressing F10, then choose Integrated Devices, and setting both NICs to Enabled.