UNSOLVED

2fwd2

updated

3 months ago

2

2fwd2

4 Posts

0

7937

March 14th, 2005 23:00

installing SBS 2003 on a poweredge 4200

I have benn trying to install SBS 2003.  Everytime the systems reboots the first time it tells me it cannot read from the selected boot device. hardware config problem.  I know that it is something I am doing wrong.
 
 
 
  • jmwills

    2 Intern

    •

    11984 Posts

    128

    0

    Posted March 18th, 2005 13:00

    Are you booting from the CD Drive of installing then removing?  Are there RAID drives involved here?  We need some machine configuration info.
  • 2fwd2

    4 Posts

    128

    0

    Posted March 18th, 2005 14:00

    yes I booted from the cd drive, and left it in there.  there is a 6 drive raid set at raid 5.  I think the machine does not know where the perc is and I cant find where to set it in the bios or other place.  the machine is looking in the a: then c: by the bios but who knows.  I know that the utility partition is not there but I cannot get Dell to send me the cd to create it.  the bios is up to date as is the firmware for the perc.
  • jmwills

    2 Intern

    •

    11984 Posts

    128

    0

    Posted March 18th, 2005 17:00

    Once you have the installation going, change the boot sequence back to include the C drive first, or at least where the MBR is.
  • 2fwd2

    4 Posts

    128

    0

    Posted March 18th, 2005 19:00

    I have tried it both ways and get the same error.  Do you know of another way to set the perc as the boot device?  It has to be somewhere during the start up of the computer,  I have been to scsi select and that was no help. I think that was crtl m maybe it is at the ctrl a that comes up later.
  • jmwills

    2 Intern

    •

    11984 Posts

    128

    0

    Posted March 19th, 2005 03:00

    No I don't, sorry.
  • 2fwd2

    4 Posts

    128

    0

    Posted April 19th, 2005 00:00

    Thanks for all your help.  It seems as though I was waiting to long before I hit F6 I have never seen one that had to be hit when it was just inspecting the hardware but who cares it works.  thanks again for all the help