UNSOLVED

texbrian

updated

3 months ago

T

texbrian

1 Message

0

7413

January 27th, 2008 15:00

Dell SC440 with Windows Home Server question

I am building a Windows Home Server machine. Windows Home Server when it installs not only formats the hard drive but it removes partitions. When this occurs it removes Dell utilities. Does anyone know if there is a  Dell Utilities for Windows Home Server or a way to install it after the os is installed. If not i guess i can live without it but i am in hopes Dell will see the market potential for Home Servers and support this sometime in the future.


Dell SC440 2.2 ghz core 2 duo 1gb ddr2  for

Message Edited by texbrian on 01-27-2008 11:58 AM
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    173

    0

    Posted January 28th, 2008 12:00

    I believe you can download a bootable CD with the Dell diagnostics. This would make the need for the partition go away.

    As Home Server isn't supported by Dell on this system, or on any Dell system (they don't offer it on any system that I've seen), I doubt Dell has any tools to allow you to leave the partition in tact while installing home server.
  • tommo666

    4 Apprentice

    •

    1211 Posts

    173

    0

    Posted April 16th, 2008 20:00

    I have just bought a 440 to use as a Home server, i already have it running on a pre loved desktop since beta.

     

    As Dev says, the diags are available on a cd that came with the open manage pack and you can boot from it and run diags.

     

    Unfortunately you can't use the build cd to pre-install the drivers because although home server is based on small buisness server 2003, it uses the later WinPE installer that's used by Vista and win2008. One bonus though, you can specify additional drivver and use USB as well as the traditional floppy.