Dell PowerEdge R730 with PERC H730 Controller ESXi 6.0
We have a new R730. The drive configuration consists of two virtual drives: a 2.78GB RAID 1 and a 2 TB RAID 10. ESXi 6 from the Dell iso (VMware-VMvisor-Installer-6.0.0.update03-5050593.x86_64-Dell_Customized-A00) is installed on the first virtual drive. ESXi sees the 2TB drive but will not create a data store on it.
When attempting to use the 2 TB drive, it says it will format it to 280 GB instead of 2 TB. The format then fails with a message that ESXi cannot change the host configuration.
At this point we're stymied. What do we need to do to make this go? Thanks,
DELL-Josh Cr
Community Manager
•
9790 Posts
•
45217 Points
2401
0
Posted April 4th, 2017 13:00
Change drives to 512n drives. ESX 6.5 will eventually have support for 4k, but 6.0 may not. https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2091600