UNSOLVED

r2k

updated

3 months ago

R

r2k

3 Posts

0

13115

January 6th, 2006 09:00

[Debian Sarge]: Kernel 2.6x

Hi folks
I have got a problem with my PowerEdge 1850: I need Kernel 2.6.12.4 for installing some VServers under Linux.

I tired to install Sarge with Kernel 2.6.8 but there was no driver for the RAID-System :( I also tried to compile a 2.6.12.4 by hand but my debian is missing the megaraid.o module :(

Is there a solution how I could install Kernel 2.6.8 or higher on my PowerEdge 1850.

Greetings from Switzerland
r2k
  • BigDuke6_swe

    1 Rookie

    •

    19 Posts

    797

    0

    Posted January 16th, 2006 23:00

    What about downloading the kernel source from kernel.org?
  • r2k

    3 Posts

    797

    0

    Posted January 17th, 2006 05:00

    Hi
    yes i have downloaded the source from kernel.

    After some tests it runs. I had to compile the megaraid.o into the Kernel and not als module :(

    Greetings from Switzerland
    r2k
  • BigDuke6_swe

    1 Rookie

    •

    19 Posts

    797

    0

    Posted January 17th, 2006 07:00

    Why the sad smiley? There's nothing wrong with compiling it into the kernel, is it?
  • r2k

    3 Posts

    797

    0

    Posted January 17th, 2006 07:00

    sure, but I had forgotten it :)
  • dunkapunk

    2 Posts

    797

    0

    Posted May 6th, 2006 04:00

    I'm rather new to linux, and therefore; how do you compile det megaraid2 driver into the new kernel?

    It seems like this is just the right solution for me hence I need kernel 2.6 on my schoollinux distibution on dell 1850 servers.

  • BigDuke6_swe

    1 Rookie

    •

    19 Posts

    797

    0

    Posted May 6th, 2006 06:00

    How far do you get on your own then?
    What do you need to know, specifically?
  • dunkapunk

    2 Posts

    797

    0

    Posted May 6th, 2006 11:00

    Well. I have newer used any other command then "apt-get install kernel.imagexxxxx" when it comes to upgrading the kernel. I guess the story is a litte different when you have to "compile the module into the kernel".
     
    The reason is ofcourse that I get "Kernel panic" after running the "apt-get install kernel.image" command.
  • BigDuke6_swe

    1 Rookie

    •

    19 Posts

    797

    0

    Posted May 8th, 2006 10:00

    Well, then you have some learning to do...
    You download the kernel source code from www.kernel.org, make sure you have the tools necessary to compile it, gcc for example.
    If you google for "compile linux kernel" or something like that, you should be able to find out the rest I think.
    There's a learning curve but when you have done it, it's easy the next time.

    Useful commands
    modprobe -to load modules
    lspci -to find out what hardware you have
    In the kernel-source top folder
    make menuconfig
    make clean
    make
    make dep
    make modules
    make modules_install
    make install

    Google is your best friend on this, there's tons of info on how to do this...