UNSOLVED

rpn1000

updated

15 years ago

R

rpn1000

26 Posts

0

43848

September 18th, 2011 10:00

T110 II/Perc h200/windows 7 64 bit

I'm setting up a server for a new company.  Budges are tight so WIndows 2008 as a server OS is out.  Instead I want to use Windows 7 Pro 64 bit.  The server will be dedicated and no one will use it as a workstation. The application we are going to host works fine on WIn 7. 

I'm buying a server now so when we grow to the point where WIndows server OS is appropriate, we won't need a new piece of hardware. 

Now the question.  Does anybody have the Perc H200 controller running under WIndows 7 64 bit.  If so where did you get the drivers or was the H200 auto detected during the WIndows 7 install.  I will be running two 250G SATA drives in RAID1

Thanks for any assistnace to this question.  

 

 

  • theflash1932

    11 Legend

    •

    16255 Posts

    643

    0

    Posted September 18th, 2011 18:00

    If someone has done this, I would hope they would share, but the most likely driver you will need for the H200 is the one for Server 2008 R2.  Since R2 and Windows 7 are based on the same kernel, it is usually the best option when trying to work with unsupported hardware/software combinations.  

    Worst case scenario ... you could install with the drives connected to the onboard SATA ports instead of the H200, where you would only need the Intel chipset driver for W7x64.