UNSOLVED

MD500_Pilot

updated

6 years ago

0

2434

January 29th, 2021 20:00

R820 Gen2 PCIe NVMe Card?

I have a Dell R820 with the Dell 4-drive NVMe drive bay utilizing the Dell YPNRC PCIe card but this card is only PCI Gen2 and is limiting the speed on my Intel PCIe drives. Is there another Dell card that will allow PCIe GEN3 to the Dell 693W6 PCIe backplane?

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    1787

    0

    Posted January 31st, 2021 22:00

    Hi,

     

    Unfortunately, DPN# YPNRC is the only PCIe SAS Extender Bridge available for R820. There is an alternative part if YPNRC is not available, that's DPN# 8MW60. But I don't think it would be GEN 3 PCIe.

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    1773

    0

    Posted February 1st, 2021 13:00

    Hello,

     

    Gen 3 PCIe capability was introduced on the 13th generation platforms. The 14th generation have a mix of PCIe Gen 3 and Gen 4, depending on specific model. I would look for a 13th generation server, like an R730 or R830, if you want something comparable in power to the R820, but with PCIe Gen 3 support. 

  • 1774

    0

    Posted February 1st, 2021 13:00

    Thank You for the information Joey -

     

    Which Dell server supports G3 PCIe/NVMe drives?

  • 1763

    0

    Posted February 1st, 2021 17:00

    Thanks Dylan - 

    Specifically, I was looking for Dell servers that have G3 or G4 NVMe drive cages for NVMe SSD drives. Doe the R830 support that or is the NVMe card still only G2?

  • 1762

    0

    Posted February 1st, 2021 17:00

    Hi Dylan - 

    According to this spec sheet from Dell:

    https://www.dell.com/downloads/global/products/pedge/r820_spec_sheet.pdf

    The R820 is Gen3 PCIe. I want to make sure you understand what I am looking for in the Dell server. I specifically need Gen3/4 PCIe NVMe capability. The NVMe PCIe controller card in my 820 is only Gen2 and limits the data throughput to my new Intel drives.

    Thanks

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    1756

    0

    Posted February 1st, 2021 19:00

    Hi,

     

    Yes, R820 does able to support PCIe Gen 3, but the PCIe extender card is Gen 2, therefore the communication between your drives to the main board is downsized to Gen 2. 

     

    PowerEdge 14G (R440 and above) does able to support PCIe NVMe Gen3 with it's backplane but we do not have information about the data throughput which can meet your requirement. It's advisable to contact the sales department to have them check it out for you. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • 1744

    0

    Posted February 2nd, 2021 12:00

    Thanks Joey - This is great information. I will do some more digging.

  • kemeris

    3 Posts

    1561

    0

    Posted May 13th, 2021 07:00

    If your CPU is e5-2600 v1, this controller will be limited to PCI-E v2. You need CPU e5-2600 v2