UNSOLVED

harlanlax

updated

14 years ago

H

harlanlax

1 Rookie

•

13 Posts

•

2 Points

0

4823

December 20th, 2012 06:00

PowerEdge 840 raid controlelr failed

Client has a  PowerEdge 840 and the Raid controller has failed.  The part is E2K-UCS-51 (B).

Can I get the part from Dell directly?

When swapping it out should I take out 1 of the drives (they are mirrored) before installing replacement controller?

If this does not solve it can I take the drive out.  They are Hard Drive, 160G, S2, 7.2K, 8M Unleaded, Seagate-Tonka and read them using an external adapter connected to another live machine, if so what kind of adapter will I need?  In other words can I connect something usb to a working machine and plug in the drive and read the data off of it?

  • 193

    0

    Posted December 20th, 2012 06:00

    This part, the SAS 5/ir, is no longer available through Dell. However, you can locate it here:

    http://www.impactcomputers.com/un939.html

    Replace the controller, the configuration should remain on the drives for the RAID 1 and should boot up.

    Let us know if you need additional assistance.

    Regards,

  • 193

    0

    Posted April 19th, 2013 00:00

    I have just picked up a good used desktop tower,  it has the controller you are looking for.

    Maybe if you email me we can swap knowledge about this controller and am happy to send it to you.

    Regards

    Albert

    [ADMIN NOTE: Email address removed per privacy policy]