UNSOLVED

maidik

updated

14 years ago

M

maidik

1 Message

0

52800

November 26th, 2012 06:00

no 64 bit driver for PERC 6i and windows 2003??

I am trying to install Windows server 2003 64-bit edition on PowerEdge 1950 with a PERC6i controller.  On Dell driver page for 1950 box I found the 32bit driver but no driver for 64 bit Windows. Am I blind or missing something? The filename of the downloaded SAS PERC 6i  was R194052.exe and it only contained the 32-bit version.

Also,  I dont understand why the 32bit Windows 2003 with the same 32-bit driver fails to detect the previously created volume  on the controller. It used to be a Linux server and the Linux still boots from the RAID volume but Windows setup cannot detect any drives to install itself to.

WHY?

Thanks in advance for helpful info.

M

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    1253

    0

    Posted November 26th, 2012 07:00

    Maidik,

    Here is the driver and firmware updates for 2003 x64.

    Let me know if these are the downloads you need.

    Driver - http://www.dell.com/support/drivers/us/en/555/DriverDetails/Product/poweredge-1950?driverId=CN08G&osCode=WX64&fileId=3008787312

    Firmware - http://www.dell.com/support/drivers/us/en/555/DriverDetails/Product/poweredge-1950?driverId=W83M2&osCode=WX64&fileId=3008799784

    Thanks.

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • 1253

    0

    Posted March 21st, 2017 11:00

    Can you point me to the correct driver for the PowerEdge 2950 PERC 6/i Integrated SAS Raid controller? I am needing it for WS 2008 R2 and am unable to locate one. I see it for the other OS versions but only firmware for this. OpenManage is complaining that 2.24.00.32 is available to upgrade to.

  • theflash1932

    11 Legend

    •

    16255 Posts

    1253

    0

    Posted March 21st, 2017 14:00

    2.24.00.32 is a 32-bit driver, so that can't be correct. If that is indeed what it is telling you, I would suggest making sure your firmware and OMSA are up to date.

    Driver is native/built into Server 2008 R2, so if there is a newer version, it will be available via Windows Update.

    I have a 2950 with a PERC 6 reporting driver version: 4.05.01.64.