New PowerEdge 2800 C partition is running out of space
We've got a fairly new (Aug.2005) PowerEdge 2800. When I purchased it I agreed, against my better judgement, with the sales person to have it configured with a 12 gig C partition and a 120 gig D partition. It has the OS and Exchange on C and all of the data and log files on D. Now it's down to only 1.3 gig left on C and I really do need to do something to expand the size of that partition sooner, rather than later. I've read a lot of thing about it and the only one that seems reasonable is the incrementally replace each of the 3 drives that make up the RAID 5 virtual disk with drives that are each larger than what's in there now and after that run diskpart on each disk? Is there any other (cheaper) way of doing this? PLEASE HELP!!
I have come across something named "Partition Manager 8.0 Server Edition" that appears to be able to address resizing these partitions, but I haven't found any documentation on whether it can deal with partitions on a RAID virtual disk as I have.
Servermagic doesn't seem to show up on Symantec's site anymore (the manufacturer was Powerlink, which was bought by Symantec/Norton) except under support.
The 'regular' Partition Magic won't install on a server OS.
One option that takes downtime would be to create a 2nd raid container on your unused disks, then copy the data on the D-drive or the whole D-partition to this container (copy partition with Trueimage or Ghost or so), then delete the old D-drive (or at least change the drive letter to something previously unused), change the drive letter on the new drive to "d"put a swap file on the new D-drive and remove it from the C-drive (see
here for limitations of using diskpart). Now you reboot to make sure the swap is no longer on the C-drive. If you didn't delete the old D-drive yet, you have to delete it now. Now you try diskpart to see if it can extend the C-drive. I say try as Microsoft's article says "
Only the extension of data volumes is supported. System or boot volumes may be blocked from being extended". Then a bit later it says "
You cannot extend the partition if the system page file is located on the partition. Move the page file to a partition that you do not wish to extend".
I'm thinking it won't extend with diskpart, but it might if you move the swap file off of it.
If it doesn't work, another 'trick' would be to create a partition the size you wish to extend with (do not format or assign a drive letter, just create the bare partition), then create another partition behind this and make it FAT32 (so will have to be 32GB or smaller). Now boot to a dos floppy and use Ghost to make a 'backup' of the C-drive in the form of a ghost image (Acronis Trueimage can probably do this too) onto the fat32 partition (in dos the Windows C-drive won't have a drive letter and the fat32 partition will get the C-drive letter, so be sure to do the right things).
Now you delete the original C-drive, delete the dummy partition you created and then use Ghost to copy the backup back to a partition that uses the full available size.
The reason for the dummy partition is to prevent the fat32 partition from being right behind your boot partition and not allowing you to restore back to a larger partition.
At any time you should have fully verified backups of your data as these steps are fairly intrusive.
I was talking about "Partition Manager", not "Partition Magic" It is an app from a German company named Paragon Software.
There is a lot of contradictory and convaluted information out there about this subject as you have discovered no doubt. PM seems like as good a bet as any and their tech support told me that if Windows Disk Management "sees" the RAID as a disk, then their application will work because it works with windows interpretation of what is there and not what is actually there. In this case 3 drives in a raid. I bought a copy of the app this AM and will let you know how it works. Wish me luck.
this is my system: partition C 12Gb (system, full), partition E 20Gb (empty), 2 disk, rad1
partition D 3 disk raid 5
i resolve the problem with this method.
1) chkdsk c: /f /r (it resolve all errors in partition C), require reboot
2) chkdsk e: /f /r (if resolve all errors in partition E), require reboot
3) resize the partition E with unallocated space before the partition E .Note: the unallocated space must be consequent partition C. I use acronis 9.0 disk director, bootable media master disk, but is older now. You must use acronis 10.0 disk director server, see on the web witch support w2k3 server)
4) reboot the server, the s.o. recognize the change and it require to reboot again
5) resize the partition C
6) reboot the server, the s.o. recognize the change and it require to reboot again
Is important that on the drive there aren't errors.
I tried the Partition Manager up to a point that requires a reboot and canceled because I cannot be taking this server offline by rebooting over and waiting for resizing while users are dependent on it for services so I will be coming in here this weekend to do the resize. The process for acronis sounds similar to the partition manager. I will run a chkdsk first to make certain of no errors on the disks. That sounds like a good idea.
My recommendation is to backup eveything, clear the array congiruations and create one array. For the small amount of disk space required for the OS and Applications compared to data, along with the small amount of time it takes to back up these, versus putting everything together again, partitioning accomplishes very little.
Not only that, but if you have a drive fail even when it's partitioned, you still lose access to the data. it's much easier to replace a 73 with a 73 and let it rebuild, than replace and go thru the headache of rebuilding that patrtitioned space.
If you just absolutely have to have OS/Ap's and data separated, do so by using separate drives on separate arrays.
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
310
0
Posted September 6th, 2006 10:00
Also, are the C- and D-drive on the same container? (check disk management (non-array manager) and see if C and D are on the same disk in there)
The answers to these questions will influence the options you have available to you.