If you had a raid 5, and it messed up but you knew you had 2 good drives....
yet it says "A read error has occured, press ctrl+alt+del to continue" when you boot them, what would you do?
Heres the situation. Dell 2650 with Perc 3/Di. A 3 disk raid 5 setup in slots 0/1/2. Slot 0 was reporting failed drives, so I tried 5+ hard drives all exactly the same as the failed drive and it kept failing the rebuild. So I took it into dos and initilized one of the drives since it was showing up as a 288MB drive when its a 36gig drive, so I init it, and it shows up as 36gig. I start the rebuild and it fails again. So I'm like okay, maybe the slot is bad, I have a spare backplane so I'll swap it out and see if that fixes it. WRONG. I swapped it out, and now it gives me that error above. I swapped the origional back in, and I still get that error It shows up as the container is critical, but not failed. I've used the disk check in the raid controller and both disks go thru fine. I've tried chkdsk in the win2k3 disk in recovery and it says theres errors preventing chkdsk from running.
I would delete the virtual disk from within the PERC bios, recreate it and then restore your OS from your backups.
If you don't have (recent) backups, consider using a data recovery company like
DriveSavers or so to recover your data and when you have your drives back destroy the raid 5 and recreate and restore your data.
The same sort of thing happened to me recently. I have a 3 disc raid5, and it downgraded the raid to degraded with the 2nd disc failing, then a few hours later downgraded again to the 3rd disc failing.
While i knew chances of two drives failing at the same time are slim to none, i assumed the first drive was really the bad one.
i replaced it, started a rebuild, and was on my way.
a few hours later the server rebooted..
it didn't rebuild..
it ended up being the thrid drive was in fact failing and not the second. The third drive had bad sector/blocks that i was able to find (but not repair) with the CERC VERIFY DISC commands.
thats what i would do if i was you.
If you have two good disc's, and can verify they are good with the VERIFY DISC command in the CERC BIOS.. i'd try and force the raid up (i think its control+r)
if it shows as in fact 3 drives are bad, and if you still can't boot... i would consider replacing drives and restoring from backup.
good luck bro. Also , you can chat with Enterprise Support at support.dell.com,. they will walk you through anything you need to do and troubleshot it with you.
They are great, and i dont think they are from india!
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
218
0
Posted August 15th, 2008 12:00
If you don't have (recent) backups, consider using a data recovery company like DriveSavers or so to recover your data and when you have your drives back destroy the raid 5 and recreate and restore your data.