
UNSOLVED
How to Initialize PERC3/DC before PERC2/DC?
Hello,
I have a PowerEdge 6450 with a PERC3/DC and a PREC2/DC installed. The PERC3/DC is intalled in PCI3 and the PERC2/DC is installed in PCI5. However, the PERC2/DC will always initialize before the PERC3/DC. Is there a way to change this? (The PERC2/DC also initialized before the PERC3/DC when the PERC2/DC was in PCI3 and the PERC3/DC was in PCI5.)
The reason I ask is the PERC3/DC is connected to four Seagate ST318404LC drives via the system back plance and the PERC2/DC is connected to seven Seagate ST118202LC drives in a PowerVault 200S and whenever I run the Server Assistant bootable CD-ROM, it defaults to the PERC2/DC as the bootable controller but I want the PERC3/DC to be the bootable controller.
Any ideas?
Cheers!
Dave
I have a PowerEdge 6450 with a PERC3/DC and a PREC2/DC installed. The PERC3/DC is intalled in PCI3 and the PERC2/DC is installed in PCI5. However, the PERC2/DC will always initialize before the PERC3/DC. Is there a way to change this? (The PERC2/DC also initialized before the PERC3/DC when the PERC2/DC was in PCI3 and the PERC3/DC was in PCI5.)
The reason I ask is the PERC3/DC is connected to four Seagate ST318404LC drives via the system back plance and the PERC2/DC is connected to seven Seagate ST118202LC drives in a PowerVault 200S and whenever I run the Server Assistant bootable CD-ROM, it defaults to the PERC2/DC as the bootable controller but I want the PERC3/DC to be the bootable controller.
Any ideas?
Cheers!
Dave
Responses (2)
Solutions (0)

mcteddy8
11 Posts
168
0
Posted April 20th, 2005 07:00
hi..maybe u can check the boot sequence in the bios.. u can choose from there also....
hope can help u