Modify_inc

updated

4 years ago

M

Modify_inc

1 Rookie

•

32 Posts

0

412

October 21st, 2022 11:00

How do you Add a non RAID Drive to the Backplane So You can Backup the Current RAID

Dell PowerEdge T320 with PERC H710 Adapter

Apparently you can't just simply insert a drive into one of the free slots on the front backplane and expect to use it as a regular drive, like for backups.

So, with knowing this, can I create a separate RAID or VD for only this drive, so I can then use it to make a full, complete system backup of the current RAID 5?

I started to try this, but then I got the message "It is recommended that all newly created logical drives be initialized...etc..." I couldn't find any place to initialize it, so I canceled to be safe.

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    264

    0

    Posted October 22nd, 2022 06:00

    After inserting new drive can you check drive status on H710 Configuration utility or iDRAC. If it is showing as ready then you can create a RAID 0 with the drive. Is this a brand new drive or it is a used drive with configuration?

  • Modify_inc

    1 Rookie

    •

    32 Posts

    262

    0

    Posted October 22nd, 2022 07:00

    Thank you for the reply though I had created the new RAID 0 for the backup drive just a few hours ago and it worked.