UNSOLVED

Timnjohnson

updated

19 years ago

T

Timnjohnson

19 Posts

0

3217

June 12th, 2007 18:00

DURING PE2300 POST MESSAGE " NO SCSI BOOT DEVICE FOUND/ SCSI BOIS NOT INSTALLED"

Hi there, I'm setting up an old PE2300/550 to install Win 2003 Enterprise edition. The system has PERC 2/DC with 128MB BATTERY PACK, 1x6 SCSI hd and with updated Bois and ESM. The system is RAIDed 2-RAID1 and 3-RAID5 and 1 is hotspare. I'm ready to start the installation. But, during POST this message pops up " NO SCSI BOOT DEVICE FOUND and SCSI BOIS NOT INSTALLED" and then after a short pause the process continues. What Am I missing here.. all the updates are in place and everything else seems to be working fine. I need help! Thanks.
  • tommypkow

    6 Posts

    126

    0

    Posted June 14th, 2007 14:00

    Hi, You need to go into the motherboard BIOS and change the boot setting. You will need to change it from SCSI to RAID or PERC (I can't remember what it said). You should also change the motherboard battery. It is a little watch battery CR2032 you can get at virtually any store. This will retain the BIOS settings when power is out. Thanks, Tom