UNSOLVED

fret_wimp2

updated

1 year ago

F

fret_wimp2

1 Rookie

•

6 Posts

1

35097

May 16th, 2012 10:00

Crucial SSD's not working in Poweredge R710 with Perc H310

We have a Poweredge R710, with the hot swappable HD bays in the front. Its supposed to take both SAS and SATA. The raid card is the Perc H310

The server works fine with the supplied SAS HDD.

I have a Crucial M4 SSD, which is a SATA 6 interface.If i plug this into the front of the server, the server will not even boot up, and just gives an error.

If i slot the disk in after the server has booted, no lights appear on the disk and it is not visible on the server.

Can anyone advise why my crucial disks will not work in this server?


Thanks!

  • Daniel My

    12 Elder

    •

    6204 Posts

    1731

    0

    Posted May 16th, 2012 11:00

    Hello fret_wimp2

    Either the drive is malfunctioning or there is a firmware compatibility issue. The physical connectors between the various brands of hard drives are pretty much all the same. What differentiates them and causes compatibility issues is the firmware. The firmware on the HDD/SSD's determine how they communicate and announce themselves to other devices.

    If you are sure the SSD in question is functional then I would suggest making sure the firmware on the controller is current, and make sure the firmware on the SSD is also current. If it will still not function with the latest firmware updates then it would appear the two products are not compatible. When using non-validated equipment it is a process of trial and error.

    Thanks

  • pcmeiners

    6 Operator

    •

    1771 Posts

    1731

    0

    Posted May 16th, 2012 12:00

    "the server will not even boot up, and just gives an error."

    What is the exact error?

  • fret_wimp2

    1 Rookie

    •

    6 Posts

    1731

    0

    Posted May 21st, 2012 09:00

    Sorry for the late response on this. If i push in one of the SSD's and then reboot the server, it gives the error:

    "A discovery error has occurred, please powercycle the system and all the enclosures attached to this system". Until i remove the ssd, thats as far as bootup gets.

  • pcmeiners

    6 Operator

    •

    1771 Posts

    1731

    0

    Posted May 21st, 2012 10:00

    Have you tried the drive in another computer? or off the server's  interface for the cdrom?

  • fret_wimp2

    1 Rookie

    •

    6 Posts

    1731

    0

    Posted May 22nd, 2012 07:00

    i have tried the drive via usb ( i have a usb hard disk caddy) and it works fine on other pc's in the office.

  • pcmeiners

    6 Operator

    •

    1771 Posts

    1731

    0

    Posted May 22nd, 2012 13:00

    You likely have done this but....

    When you say it will not boot up, does it stop immediately or does it stop after the raid config bios comes up.If after, the SSD needs to be configured as raid 0.

    Are you up to date with all the newest mobo firmware? I see there is a fairly recent bios update

    www.dell.com/.../04

    Plenty .pdf/txt files relating to the h310 firmware, but could not find a download link. Call Dell for the link .

  • GhostPhyre

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted August 2nd, 2025 20:33

    not sure if its too late to reply to this but i figured i would let you know that to show your physical drives in unraid using dell r710 with stock perc6 raid controller you have to press ctrl+r in boot to go to perc settings and then do you need to make a vd (virtual drive) for all of the drives one drive per vd 

    after doing this your drives will show in unraid 

    (edited)

  • GhostPhyre

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted August 2nd, 2025 20:34

    @GhostPhyre​ to further explain this happens because the perc6 raid controller does not allow passthrough of your drives to unraid